de Zeklandia » 08 Oct 2018, 06:45
parrotgeek1 a écrit:Zeklandia a écrit: my Boot1 3.0.0.99 has been replaced with a Boot1.5 4.40.8
This is LITERALLY not possible; boot1's flash chip is not writable. What I think happened is that ControlX is now disabled. Try reinstalling it along with Boot2 4.0.3, and setting default boot to diags.
I did reinstall ControlX and nBoot. I can boot into any CX non-CAS OS with the supplied Boot2 4.0.3 (I flashed it to both the Boot2 and the ExtnD partitions, either works). I can also boot into Linux. When am at the boot menu, I have the calc boot from the Boot2 4.0.3 image flashed to the ExtnD partition. Still, ControlX + nBoot aren't installing ndless like they did originally and are supposed to. Without ndless, the CX CAS OS 4.5 patcher can't run and the OS crashes and self-deletes. I also have to run the ndless installer manually on non-CAS OSes.
I have attached several pictures of the boot menu:
- The boot menu.
- The boot menu's options for the Boot2 partition.
- The boot menu's options for the Diags partition.
- The boot menu's options for the ExtnD partition.
Here is a picture of what I see in BtMg:
- The main menu of BtMg.
ControlX is definitely working, it's just not patching the OS correctly:
- The ControlX loading screen. Unrelated to the issue at hand, I turned the CAS option on when I took this picture.
I can use it with CX non-CAS OS 4.5, I just have to install ndlessly manually to get stuff like nClock to run. The whole reason I kept fiddling with this is because I wanted to have a CX CAS OS from 4.0.3 or before, because otherwise nClock's mini clock doesn't work. I didn't realize that OSes after 3.6 need a patcher, and patchers are only available for 4.4 and 4.5. I also had ZLock installed, but it is broken on the newer OSes. In order to delete ZLock, I had to have ControlX boot Boot1 or a newer Boot2 in order to get the OS to self-delete so I could delete ZLock with TI's linking software. Thus, I messed up the setup somewhere in that mix of reflashing the OS and using nSwitchOS. At some point, Boot1.5 4.40.8 took the place of Boot1 3.0.0.99, according to ControlX and BtMg.
However, the status screen still shows Boot1's "Code Version" to be 3.0.0.99:
- CX non-CAS OS 4.5's status screen (booted with ControlX, ndless manually installed).
- status screen.png (5.31 Kio) Vu 4088 fois
- CX non-CAS OS 4.5's about screen showing Boot1 3.0.0.99 (booted with ControlX, ndless manually installed).
- about screen.png (4.96 Kio) Vu 4088 fois