after the reset my ti nspire cx cas does not run!!

→ **MyCalcs** profile · de **yakkk** » 22 Nov 2012, 20:45

Hi, i was changing colors in the default theme of my calculator but then i pressed the reset button but after the loading the display remain grey with the picture of the clock...what can i do to solve the problem?
thanks

→ **MyCalcs** profile · de **critor** » 22 Nov 2012, 20:50

You need to launch the diagnostic software which should report you the problem and automatically fix it.

Press and hold the 'reset' button on the back
Press and hold
Release the 'reset' button - the calculator should turn on
Release the other keys

The diagnostics software should report the problem with a GPIO error.
Just press esc and then use 'reset' to reboot the calculator.

It should be ok now

→ **MyCalcs** profile · de **quentin974** » 23 Nov 2012, 08:21

If you want, you can also do this: press reset,

,

: ,and

.Then stop pressing Reset, and the usual screen appears. At the middle of the loading, a menu will appear: choose 5 and confirm. After, download your OS and install it through the Studend software. If the problem still exists, I don't know...

→ **MyCalcs** profile · de **critor** » 23 Nov 2012, 09:07

No quentin974: the maintenance menu does not solve this problem as it does not clear the SRAM.
The installed OS will be stuck at the same place.

The right answer is the diagnostics software as described in my above post.
For your personal information, the problem is described in this french topic:
viewtopic.php?f=16&t=8944