Aujourd'hui, xacto revient avec une nouvelle version reconnaissant plein de formats source!
Bon ciné!
Liens:
Nspire Movie Player
Script de conversion avec interface graphique
Boot Loader Stage 1 (1.1.8916)
Build: 2007/4/23, 23:37:16
Copyright (c) 2006, 2007 Texas Instruments Incorporated
Using any keys
Last boot progress: 38731
Clocks: CPU = 90MHz AHB = 45MHz APB = 22MHz
Available system memory: 37292
Checking for NAND: NAND Flash ID: ST Micro NAND256R3A
PM is turning the device OFF
PM has turned the device ON
SDRAM memory test: Pass
Clearing SDRAM...Done.
Clearing SDRAM...Done.
Clearing SDRAM...Done.
Boot option: Toggle Diagnostics
Loading DIAGS software...
96%
BOOT1: loading complete (96 ticks), launching image.
U-Boot 1.1.2 (Feb 2 2007 - 19:48:46)
U-Boot code: 11800000 -> 1182DC2C BSS: -> 1183246C
RAM Configuration:
Bank #0: 10000000 32 MB
Flash: 512 kB
NAND:32 MB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
Starting Phoenix diagnostics...
Phoenix ASIC#
Starting Phoenix diagnostics...
Phoenix ASIC
Phoenix ASIC# help
? - alias for 'help'
autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootm - boot application image from memory
bootp - boot image via network using BootP/TFTP protocol
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
crc32 - checksum calculation
dhcp - invoke DHCP client to obtain IP/boot params
echo - echo args to console
erase - erase FLASH memory
flinfo - print FLASH memory information
go - start application at address 'addr'
help - print online help
iminfo - print header information for application image
imls - list all images found in flash
itest - return true/false on integer compare
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
loop - infinite loop on address range
md - memory display
mm - memory modify (auto-incrementing)
mtest - simple RAM test
mw - memory write (fill)
nand - NAND sub-system
nboot - boot from NAND device
nfs - boot image via network using NFS protocol
nm - memory modify (constant address)
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
tftpboot- boot image via network using TFTP protocol
tidiag - perform Phoenix board diagnostics
version - print monitor version
Phoenix ASIC#
Phoenix ASIC# bdinfo
arch_number = 0x00000203
env_t = 0x00000000
boot_params = 0x10000100
DRAM bank = 0x00000000
-> start = 0x10000000
-> size = 0x02000000
ethaddr = 08:00:28:32:16:FF
ip_addr = 192.168.101.70
baudrate = 115200 bps
Phoenix ASIC# coninfo
List of available devices:
serial 80000003 SIO stdin stdout stderr
Phoenix ASIC# demosave
Unknown command 'demosave' - try 'help'
Phoenix ASIC# dhcp
SMC91111: PHY auto-negotiate timed out
Warning: MAC addresses don't match:
HW MAC address: 02:80:AD:20:31:B8
"ethaddr" value: 08:00:28:32:16:FF
Using MAC Address 08:00:28:32:16:FF
BOOTP broadcast 1
Phoenix ASIC# dir
Unknown command 'dir' - try 'help'
Phoenix ASIC# flinfo
Bank # 1: SST SST39LF/VF400 (4 Mbit, uniform sector size)
Size: 512 KB in 16 Sectors
Sector Start Addresses:
20000000 (RO) 20008000 (RO) 20010000 (RO) 20018000 (RO) 20020000 (RO)
20028000 (RO) 20030000 20038000 20040000 20048000
20050000 20058000 20060000 20068000 20070000 (RO)
20078000
Phoenix ASIC# imls
Phoenix ASIC# mtest
Pattern 005F8B0A Writing... Reading...
Phoenix ASIC# nboot
** No boot device **
Phoenix ASIC# printenv
bootargs=mem=32M console=ttyS0,19200n8 noinitrd root=/dev/nfs rw
nfsroot=157.87.82.48: /home/mwd/myfs/target ip=dhcp
bootcmd=tidiag
bootdelay=0
baudrate=115200
ethaddr=08:00:28:32:16:ff
ipaddr=192.168.101.70
serverip=192.168.101.50
netmask=255.255.255.0
bootfile="uImage"
b1save= protect off all; era 1:0; era 1:1; era 1:2; era 1:3; era 1:4; era 1:
5; era 1:6; era 1:7; era 1:8; era 1:9; era 1:10; era 1:11; era 1:12; era 1:1
3; era 1:14; era 1:15;cp.b 10000000 20000000 30000
b1update=loadb; protect off all; era 1:0; era 1:1; era 1:2; era 1:3; era 1:4;
era 1:5; era 1:6; era 1:7; era 1:8; era 1:9; era 1:10; era 1:11; era 1:12;
era 1:13; era 1:14; era 1:15;cp.b 10000000 20000000 $(filesize)
b2erase=nand erase 4000 15C000
b2save=nand write 10000000 4000 $(filesize)
dgerase=nand erase 160000 A0000
dgsave=nand write 10000000 160000 $(filesize)
fserase=nand erase 200000 1E00000
up1=tftp 10000000 phoenix.raw
up1a=tftp 10000000 phoenix.raw ; g 10000000
up=tftp 10000000 grafixwt_demo.raw
up2=tftp 10000000 grafixwt_demo.raw ; g 10000000
demo=nand read 10000000 4000 480000; go 10000000
demoerase=nand erase 4000 480000
demosave=nand write 10000000 4000 $(filesize)
stdin=serial
stdout=serial
stderr=serial
Environment size: 1253/32764 bytes
Phoenix ASIC# protect
Usage:
protect - enable or disable FLASH write protection
Phoenix ASIC# tidiag
Starting Phoenix diagnostics...
Phoenix ASIC# version
U-Boot 1.1.2 (Feb 2 2007 - 19:48:46)
Phoenix ASIC#
Important: The TI-Nspire CM-C Handheld is not compatible with the Lab Cradle and only supports the use of a single connector at a time.
Important: L'unité TI-Nspire CM-C n'est pas compatible avec la Lab Cradle et ne supporte que l'utilisation d'un seul connecteur à la fois.