critor a écrit:Just check the Boot2 version in the line at the top of the screen when the calculator is booting.

That was one of the things I took a picture of. It says Boot2 4.3.49.

Maybe your calculator is not booting on Boot2 4.0.3 if Ndless doesn't get installed. But if I have flashed Boot2 4.0.3 to the Boot2 partition and ExtnD, even if I am choosing to boot from ExtnD and for some reason it isn't, what else is it booting from? How can I verify what is booting if ControlX ...

If the screen blinks red it means you have the wrong patcher for your OS I wasn't aware of that. Since ndless doesn't get installed on boot and thus the CAS OSes crash, I can only ever run it on a non-CAS OS. My point was, there is no evidence that it gets run on boot with the CAS OS, and it doesn'...

When installing a CX CAS OS on a CX with nBoot+ControlX, you have to press reset on it first boot, as soon as you get the gray screen after the loading bar reaches 100%. If you don't or don't do it fast enough, then it will start silently erasing itself and then reboot the calculator. I've been doi...

my Boot1 3.0.0.99 has been replaced with a Boot1.5 4.40.8 This is LITERALLY not possible; boot1's flash chip is not writable. What I think happened is that ControlX is now disabled. Try reinstalling it along with Boot2 4.0.3, and setting default boot to diags. I did reinstall ControlX and nBoot. I ...

My calc is a CX non-CAS, hardware revision C. I had successfully installed ControlX + nBoot. Everything was working well. Then I made a mistake somewhere in the midst of using nSwitchOS. Now my Boot1 3.0.0.99 has been replaced with a Boot1.5 4.40.8. Everything still works, but ndless is no longer in...