[FR/EN] Downgrade Nspire OS 3.9 CX / ClickPad
Re: [FR/EN] Downgrade Nspire OS 3.9 CX / CX CAS
Bsoir
Je viens de passer de 3.9 à 3.6 et j'ai installé ndless 3.6
Mais je remarque que je ne peux plus charger ma TI à 100%. Le chargement s'arrête à 75%, quelle que soit la durée de charge.
Quelqu'un a-t-il une idée?
Je viens de passer de 3.9 à 3.6 et j'ai installé ndless 3.6
Mais je remarque que je ne peux plus charger ma TI à 100%. Le chargement s'arrête à 75%, quelle que soit la durée de charge.
Quelqu'un a-t-il une idée?
-
randrianandrasana florentin
Niveau 1: MD (Membre Débutant)- Messages: 2
- Inscription: 04 Déc 2014, 07:09
- Genre:
- Calculatrice(s):→ MyCalcs profile
Re: [FR/EN] Downgrade Nspire OS 3.9 CX / CX CAS
My calculator is doing the same thing again...
It starts booting it starts showing a loading clock at then the calculator shuts off.
What should I do now?
I have a revision S calculator.
I already saw the calculator booting, but only after many tries.
It starts booting it starts showing a loading clock at then the calculator shuts off.
What should I do now?
I have a revision S calculator.
I already saw the calculator booting, but only after many tries.
-
JSantosPT
Niveau 3: MH (Membre Habitué)- Messages: 15
- Inscription: 13 Jan 2015, 18:14
- Genre:
- Calculatrice(s):→ MyCalcs profile
Re: [FR/EN] Downgrade Nspire OS 3.9 CX / CX CAS
If delete the OS do I get 3.9 back or the non working 3.6?
-
JSantosPT
Niveau 3: MH (Membre Habitué)- Messages: 15
- Inscription: 13 Jan 2015, 18:14
- Genre:
- Calculatrice(s):→ MyCalcs profile
-
critorAdmin
Niveau 19: CU (Créateur Universel)- Messages: 41792
- Images: 15280
- Inscription: 25 Oct 2008, 00:00
- Localisation: Montpellier
- Genre:
- Calculatrice(s):→ MyCalcs profile
- YouTube: critor3000
- Twitter/X: critor2000
- GitHub: critor
Re: [FR/EN] Downgrade Nspire OS 3.9 CX / CX CAS
By selecting the delete OS option?
Or there is another way?
I am going to see if I can make the calculator boot, because I already saw it booting once I even fully charged it.
If the calculator doesn't boots what should I do to get OS 3.9 back?
Or there is another way?
I am going to see if I can make the calculator boot, because I already saw it booting once I even fully charged it.
If the calculator doesn't boots what should I do to get OS 3.9 back?
-
JSantosPT
Niveau 3: MH (Membre Habitué)- Messages: 15
- Inscription: 13 Jan 2015, 18:14
- Genre:
- Calculatrice(s):→ MyCalcs profile
Re: [FR/EN] Downgrade Nspire OS 3.9 CX / CX CAS
You should be able to transfer OS 3.9 the normal way.
Membre de la TI-Chess Team.
Co-mainteneur de GCC4TI (documentation en ligne de GCC4TI), TIEmu et TILP.
Co-mainteneur de GCC4TI (documentation en ligne de GCC4TI), TIEmu et TILP.
-
Lionel DebrouxSuper Modo
Niveau 14: CI (Calculateur de l'Infini)- Messages: 6861
- Inscription: 23 Déc 2009, 00:00
- Localisation: France
- Genre:
- Calculatrice(s):→ MyCalcs profile
- Classe: -
- GitHub: debrouxl
Re: [FR/EN] Downgrade Nspire OS 3.9 CX / CX CAS
Connected to the PC the calculator bootted at the 1st try, luck or not I am going to install OS 3.9 again, which is a shame because I liked to have ndless on my calculator.
I would advise on the first post, that downgrading at least with revision S calculators might not be working
I would advise on the first post, that downgrading at least with revision S calculators might not be working
-
JSantosPT
Niveau 3: MH (Membre Habitué)- Messages: 15
- Inscription: 13 Jan 2015, 18:14
- Genre:
- Calculatrice(s):→ MyCalcs profile
Re: [FR/EN] Downgrade Nspire OS 3.9 CX / CX CAS
Now this one is strange I just updated the OS, the calculator remains with same problems, it boots fine connected to the computer, but refuses to do it while on battery (which is fully charged).
Any thoughts on what is happening? Did I received a defective calculator and didn't noticed it (I turned it on 1st time to downgrade it, it was connected to the PC).
Any thoughts on what is happening? Did I received a defective calculator and didn't noticed it (I turned it on 1st time to downgrade it, it was connected to the PC).
-
JSantosPT
Niveau 3: MH (Membre Habitué)- Messages: 15
- Inscription: 13 Jan 2015, 18:14
- Genre:
- Calculatrice(s):→ MyCalcs profile
Re: [FR/EN] Downgrade Nspire OS 3.9 CX / CX CAS
Updated back to the 3.9.1 OS ?
If so, you can definitely ask TI-Cares about it to get it replaced. It is clearly not normal, especially with an unmodified OS being the one that came with it.
But I'd advise first if the problems remains that you try to [backup your data and] completely format the Nspire (from the maintenance menu) and install the OS again. Maybe that can fix issues.
If so, you can definitely ask TI-Cares about it to get it replaced. It is clearly not normal, especially with an unmodified OS being the one that came with it.
But I'd advise first if the problems remains that you try to [backup your data and] completely format the Nspire (from the maintenance menu) and install the OS again. Maybe that can fix issues.
MyCalcs: Help the community's calculator documentations by filling out your calculators info!
MyCalcs: Aidez la communauté à documenter les calculatrices en donnant des infos sur vos calculatrices !
Inspired-Lua.org: All about TI-Nspire Lua programming (tutorials, wiki/docs...)My calculator programs
Mes programmes pour calculatrices
-
AdriwebAdmin
Niveau 16: CC2 (Commandeur des Calculatrices)- Messages: 14677
- Images: 1119
- Inscription: 01 Juin 2007, 00:00
- Localisation: France
- Genre:
- Calculatrice(s):→ MyCalcs profile
- Twitter/X: adriweb
- GitHub: adriweb
Re: [FR/EN] Downgrade Nspire OS 3.9 CX / CX CAS
Yeah I went back to 3.9 thinking it was a Software issue, really strange actually.
Do you guys know if the downgrade leaves traces? Because they might refuse warranty because of that
But I'm pretty sure it is a hardware issue because the calculator haves the same issues in stock OS.
Do you guys know if the downgrade leaves traces? Because they might refuse warranty because of that
But I'm pretty sure it is a hardware issue because the calculator haves the same issues in stock OS.
-
JSantosPT
Niveau 3: MH (Membre Habitué)- Messages: 15
- Inscription: 13 Jan 2015, 18:14
- Genre:
- Calculatrice(s):→ MyCalcs profile
Qui est en ligne
Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 3 invités