unfortunetly I forgot to bring my wireless keyboard so I could type "|" in the command.
Or just press
![[shift] :nssh:](./images/smilies/nspire/ns_sh.png)
![[?!>] :nspp:](./images/smilies/nspire/ns_pp.png)
unfortunetly I forgot to bring my wireless keyboard so I could type "|" in the command.
Vogtinator a écrit:Hm, none of those show any error messages, but also no success messages, like USB device announcements. So I assume that neither mouse nor USB drive were detected at all?
The best way to view dmesg without a serial console or file transfer is to rundmesg | less
and taking pictures of each page. IIRC the pipe is+
.
dmesg | less
and connect the hub as I would connect, I realized that nothing that I plugged was working anymore and after some testing with my computer and smartphone, I realised that the Y splitter ended up being dead. After searching in my home, I found a USB A 3.0 to USB A 3.0 cable and tried to connect to one of the 3 ports on the hub, from my Power Wall Adapter. And it worked. Everything is working. The LED´s on the mouse can be modified as I do on my PC by pressing the top buttons, which wasn´t possible before. So, the best way to power a hub ends up being this. And we conclude that this was only a lack of power issue.Retourner vers Problèmes divers / Aide débutants
Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 16 invités