prob murs

→ **MyCalcs** profile · by **tama** » 04 Nov 2006, 23:08

faut inverser le - et le + dans cette ligne

regarde mieux cette ligne :
B-(K=25 and not(pxl-Test(B-1,A)) and not(pxl-Test(B-1,A+1)))+(K=34 and not(pxl-Test(B+2,A)) and not(pxl-Test(B+2,A+1-B

par rapport à celle que t'avais mise dans ton programme

(si t'as toujours pas remarqué) :
B-(K=25 and not(pxl-Test(B-1,A)) and not(pxl-Test(B-1,A+1)))+(K=34 and not(pxl-Test(B+2,A)) and not(pxl-Test(B+2,A+1-B

→ **MyCalcs** profile · by **tama** » 04 Nov 2006, 23:09

ta ligne c'était :
B+(K=25and not(pxl-Test(B-1,A)) and not(pxl-Test(B-1,A+1)))-(K=34 and not(pxl-Test(B+2,A)) and not(pxl-Test(B+2,A+1-B

→ **MyCalcs** profile · by **univscien** » 04 Nov 2006, 23:10

Arff!!

Ca parrait si simple...
Merci.

→ **MyCalcs** profile · by **tama** » 04 Nov 2006, 23:11

de rien

autre chose ?

→ **MyCalcs** profile · by **univscien** » 04 Nov 2006, 23:20

lol pour l'instant çà va...

Je prend ton MSN pour demain psk là j'suis capout.

→ **MyCalcs** profile · by **tama** » 04 Nov 2006, 23:21

ok ^^
moi aussi je m'en vais ^^

mon MSN c'est tama_boss(at)hotmail(point)fr

→ **MyCalcs** profile · by **univscien** » 05 Nov 2006, 21:09

Code: Select all: :ClrDraw :RecallPic 1 :4-A :1-B :0-P :0-T :0-M :Repeat K=105 :Repeat K :getKey-K :End :Pxl-Off(B,A :Pxl-Off(B,A+1 :Pxl-Off(B+1,A :Pxl-Off(B+1,A+1 :A+(K=26and not(pxl-Test(B,A+2)) and not(pxl-Test(B+1,A+2)))-(K=24and not(pxl-Test(B,A-1)) and not(pxl-Test(B+1,A-1-A :B-(K=25and not(pxl-Test(B-1,A)) and not(pxl-Test(B-1,A+1)))+(K=34 and not(pxl-Test(B+2,A)) and not(pxl-Test(B+2,A+1-B :If (K=21) and (B=34) and (A=84) and (A=91 :Then :ClrDraw:ClrHome :Disp "VIEU CERCEUIL,","AUCUN OBJETS." :Pause :RecallPic 1 :End :If (K=21) and (A=82) and (B=58) and (A=86 :Then :ClrDraw:ClrHome :Disp "COFRE OUVER,","VOUS OBTENEZ:","UNE POTION." :1-P :Pause :RecallPic 1 :End :If (K=21) and (A=75) and (B=23) and (A=93 :Then :ClrDraw:ClrHome :Disp "ARMOIRE VIDE." :Pause :RecallPic 1 :End :If (K=21) and (A=16) and (B=17) and (B=19 :Then :ClrDraw:ClrHome :Disp "UN CACHOT,","IL N'Y A","PERSONNE." :Pause :RecallPic 1 :End :If (K=21) and (A=54) and (B=45) :Then :ClrDraw:ClrHome :Disp "VOUS ETES","MAINTENANT FACE","AU BOSS.","LE PREMIER A LA", "LIGNE D'ARRIVE,","A GAGNE." :Pause :Disp "UTILISER POTION?","NON,TAPE 1," :Input "OUI,TAPE2:",C :If P=0 :Then :Disp "VOUS N'AVEZ PAS","DE POTION." :End :Disp "TAPE LE + VITE","POSSIBLE SUR","[CLEAR],","APRES LE","CHRONOMETRE." :Pause :ClrHome :For(X,1,10 :For(Y,1,80 :Output(4,8,10-X :End :End :ClrHome :Repeat (T=70) or (T=72) or (M=8) :Output(1,1,"MONSTRE:" :Output(2,1,"--------/" :M+(1/2)-M :If M=1 :Output(2,1,"--------/" :If M=2 :Output(2,1,"--------/" :If M=3 :Output(2,1,"--------/" :If M=4 :Output(2,1,"--------/" :If M=5 :Output(2,1,"--------/" :If M=6 :Output(2,1,"--------/" :If M=7 :Output(2,1,"--------/" :If M=8 :Output(2,1,"--------/" :Output(4,1,"TOI:" :Output(5,1,"--------/ :If (K=45) and (C=1) :T+2-T :If (K=45) and (C=2) :Then :T+4-T :0-P :End :If (T=10) or (T=12) :Output(5,1,"-------/" :If T=20 :Output(5,1,"-------/" :If (T=30) or (T=32) :Output(5,1,"-------/" :If T=40 :Output(5,1,"-------/" :If (T=50) or (T=52) :Output(5,1,"-------/" :If T=60 :Output(5,1,"-------/" :If (T=70) or (T=72) :Output(5,1,"-------/" :End :For(Z,1,90 :If (T=70) or (T=72) :Then :ClrHome :Disp "GAGNE.","NIVEAU SUIVANT." :Pause :Else :ClrHome :Disp "PERDU." :Pause :End :End :If (K=21) and (A=49) and (B=34 :Then :ClrDraw:ClrHome :Disp "VOUS ALLEZ","ENTRER DANS LA","ZONE DE COMBAT","DU BOSS 1." :Pause :RecallPic 1 :End :If (K=21) and (A=60) and (B=57 :Then :Pxl-Off(B,A :Pxl-Off(B,A+1 :Pxl-Off(B+1,A :Pxl-Off(B+1,A+1 :A-19-A:B-11-B :End :Pxl-On(B,A :Pxl-On(B,A+1 :Pxl-On(B+1,A :Pxl-On(B+1,A+1 :End

Probléme:

Il ya la croix, me donnant les coordonnées du point pointé.(des que je lance le prgm, et que j'appuis 2 fois sur les touches dirrectionels.)
Je ne vois pas mes 4 pxl

Je ne sais pas pk...