It's P-0516X

Found two more GPIO 6 and GPIO 5 are available as test points near the top connector. As far as I've tested they can't be used as outputs and are inputs with very low pullups

Ok, that will be a fun side-project
Is there a way to launch another ndless app ?

Hi,
Is it possible to launch the scratchpad from ndless without exiting the app? A bit like theses popups/ https://hackspire.org/index.php/Libndls#UI. Or a least launch another tns from the app?

Btw is there an easy way to get the to top wifi connector instead of soldering?

Found two more accessible gpios 16 and 15 on the top wifi connector don't know exactly where but they can be found on the connector but can be access by soldering on these two resistors: https://i.imgur.com/OXVBicm.jpg GPIO are both pullups for the input mode and gpio 16 can be used as an output. I ...

Yes after further testing gpio26 can only be used as an input. Do you know if there is more gpio accessible that is not on the dock connector?

I'm doing some work with the gpios and found that only 3 where listed. For the one that doesn't know you cant access gpio 0 / 4 / 22 accessible on pin 17 / 6 / 18. I found that gpio 26 which is accessible on pin 7 also works (at least as an input) is there a reason that it isn't listed on hackspire?...

Bonjour,

Je cherche a utiliser un fonction wait ou équivalent pour attendre un temps précis en ms. Cependat je ne la trouve pas.
PS: Mon programme est en c++

Ok probleme resolut j'ai modifier la lib pour que sa donne sa: char uart_getchar(void) { volatile unsigned *recv_buffer_reg = (unsigned*)0x90020000; volatile unsigned *line_status_reg = IO(0x90020014,0x90020018); bool uartready = is_classic ? *line_status_reg & 0b1 : !(*line_status_reg & 0b1...