OS 3.2.4.1237 Help!!!!!

[aditya831]

how would you flash a boot2.

[nikitouzz]

you can't.... sorry

[aditya831]

But didn't critor say that you could use an rs232 adapter to flash the boot2?

[critor]

how would you flash a boot2.

You just need a TTL/USB interface to connect to the Dock bottom port of the calculator - and then you can send the Boot2 image of your choice with the Windows HyperTerminal software.


But if you've got a TI-Nspire CX and if your hardware revision is J, K or above, Boot2 3.1 and previous versions just won't work properly after being flashed.

You can check the hardware revision by looking at the last letter from the P-0000X datestamp at the right of your serial on the back.
This one is hardware revision J for example:

[aditya831]

Oh, I have a J . Thanks anyway

[KittyCancer]

http://education.ti.com/nspire/os324

Had the same problem, Here yah go!

[Laurae]

Ce topic n'a rien à faire en z80. (déplace dans catégorie Nspire)

This topic should not be on z80 section. (moved to Nspire cat)