How to reset TI-Nspire CX CAS???

[mgscrewu]

To be honest it is the first time that ndless could affect the hardware layer. In any cases of bugs and non-boting calc was due to the software layer. The complete reformat option allow you to purge the sofware layer. The only thing that is still present as software but that Ndless doesn't affect, is the boot2. I have no idea personnally on how reformat the boot2 without a RS232 (TTL) adaptater in order to use the dock at the bottom as a formatting tool. I've already done that with critor, it's long and precise ...

oh, I see, thanks for that reply... I will try the diagnostics way.. and if it doesn´t solve the problem, well I´ll have to stay with it forever .. anyway it isn´t really important, I guess that everything (the calculous, and all that things, wich actually are the important part of the calc right ajaj) is working fine..

What about going to the diags software, which will put another part of the memory into a proper state, and might also allow detecting some hardware weaknesses ?

please explain me how to do this...
thanks

[Levak]

Hold
While holding, reset the calculator (reset button at the back) and keep holding until you see the diags software.

[mgscrewu]

Hold
While holding, reset the calculator (reset button at the back) and keep holding until you see the diags software.

ok, but once I´m there, what should I do???

[Excale]

Move around and check is everything is working .

[mgscrewu]

yes but, the first options says ok, then I´ve some submenus, that are ok .. and the 0 (more options) the first one is ok, and the others don´t say anything

edit:
says this:
1.lcd pass
2. touchpad keyboard pass
3. auto test pass
4. adc calibraton pass
5. maual test no test
6. information screen pass
0. additional function no test

and inside5:
battery tsest no test
adc test no test

inside 0:
go to os mode pass
and many other thins with no test...

PS: I cant move with the arrows, dont know why

[mgscrewu]

so nothing uh?

[trogfield]

same problem 2 years later.

[Adriweb]

What's your exact problem(s) and what have you tried yet ?