Hi,
I´m trying to recover my calculator with USB-TTL but nothing seems to be working. I´ve connected the USB-TTL to the calculator and if the battery is inserted and I turn it off to make the bootloop, the USB-TTL will turn on the red light and blink the green ones. But if I connect it to the PC I get no Input.
With Windows 10 it says an error saying it can´t open the COM Port
So I´ve tried with Windows XP (on a Virtual Machine) and even though it seems it can´t recognize the COM Driver, it actually connects to a COM Port that is detected by HyperTerminal. But sill, no text showing up.
Does anyone know what´s going on?
Hyperterminal not showing any text
First unread post • 2 posts
• Page 1 of 1
-
SuperXX
Niveau 7: EP (Espèce Protégée: geek)- Posts: 66
- Joined: 15 May 2021, 10:25
- Gender:
- Calculator(s):→ MyCalcs profile
Re: Hyperterminal not showing any text
Forget it.
Just the wrong drivers installed.
For my USB TTL FT232R I followed this guide:
https://www.usb-drivers.org/ft232r-usb-uart-driver.html
Just the wrong drivers installed.
For my USB TTL FT232R I followed this guide:
https://www.usb-drivers.org/ft232r-usb-uart-driver.html
-
SuperXX
Niveau 7: EP (Espèce Protégée: geek)- Posts: 66
- Joined: 15 May 2021, 10:25
- Gender:
- Calculator(s):→ MyCalcs profile
2 posts
• Page 1 of 1
Return to Problèmes divers / Aide débutants
Who is online
Users browsing this forum: No registered users and 46 guests