π
<-
Chat plein-écran
[^]

Exploration USB TI-CBR2 : c'est un Vernier Go! Motion !

Exploration USB TI-CBR2 : c'est un Vernier Go! Motion !

Unread postby critor » 03 Jul 2019, 08:38

113691136811367Les TI-CBR et TI-CBR2 sont des périphériques d'acquisition de mesures physiques pour les calculatrices graphiques Texas Instruments. Plus précisément il s'agit de sonars, destinés donc à mesurer la distance à un obstacle par émission et réception de salves sonores.

Niveau connectivité ils disposent tous les deux :
  • d'un port de communication série mini-Jack 2.5, qui ne peut donc pas être utilisé avec les modèles récents où ce port a été remplacé par la diode examen
  • d'un port de communication BTA (British Telecom Analogic) pour connexion à la calculatrice via une interface d'acquision si compatible (TI-CBL, TI-CBL2, Vernier EasyLink, Vernier LabPro, TI-Nspire Lab Cradle)

11366Par contre, le TI-CBR2 dispose d'une connectivité supplémentaire, USB B. Il peut donc être relié directement à toute calculatrice Texas Instruments USB à l'aide d'un câble USB mini-A ↔ USB B ou USB mini-OTG ↔ USB B certes difficile à trouver. Des adaptateurs USB mini-A ↔ USB A ou USB mini-OTG ↔ USB A un peu moins rares permettent toutefois d'obtenir des assemblages équivalents.

Puisque le TI-CBR2 dispose donc d'une connectivité USB, profitons-en pour récupérer ses descripteurs USB au branchement sur ordinateur :
Code: Select all
Information for device Go! Motion ver 1.02 (VID=0x08F7 PID=0x0004):

Connection Information:
------------------------------
Device current bus speed: LowSpeed
Device supports USB 1.1 specification
Device supports USB 2.0 specification
Device address: 0x0031
Current configuration value: 0x00
Number of open pipes: 0

Device Descriptor:
------------------------------
0x12   bLength
0x01   bDescriptorType
0x0110   bcdUSB
0x00   bDeviceClass     
0x00   bDeviceSubClass   
0x00   bDeviceProtocol   
0x08   bMaxPacketSize0   (8 bytes)
0x08F7   idVendor
0x0004   idProduct
0x0102   bcdDevice
0x01   iManufacturer   "Vernier Software & Technology"
0x02   iProduct   "Go! Motion ver 1.02"
0x00   iSerialNumber
0x01   bNumConfigurations

Configuration Descriptor:
------------------------------
0x09   bLength
0x02   bDescriptorType
0x0022   wTotalLength   (34 bytes)
0x01   bNumInterfaces
0x01   bConfigurationValue
0x00   iConfiguration
0x80   bmAttributes   (Bus-powered Device)
0x64   bMaxPower      (200 mA)

Interface Descriptor:
------------------------------
0x09   bLength
0x04   bDescriptorType
0x00   bInterfaceNumber
0x00   bAlternateSetting
0x01   bNumEndPoints
0x03   bInterfaceClass      (Human Interface Device Class)
0x00   bInterfaceSubClass   
0x00   bInterfaceProtocol   
0x00   iInterface

HID Descriptor:
------------------------------
0x09   bLength
0x21   bDescriptorType
0x0110   bcdHID
0x00   bCountryCode
0x01   bNumDescriptors
0x22   bDescriptorType   (Report descriptor)
0x0032   bDescriptorLength

Endpoint Descriptor:
------------------------------
0x07   bLength
0x05   bDescriptorType
0x81   bEndpointAddress  (IN endpoint 1)
0x03   bmAttributes      (Transfer: Interrupt / Synch: None / Usage: Data)
0x0008   wMaxPacketSize    (1 x 8 bytes)
0x0A   bInterval         (10 frames)

Microsoft OS Descriptor is not available. Error code: 0x0000001F

String Descriptor Table
--------------------------------
Index  LANGID  String
0x00   0x0000  0x0409
0x01   0x0409  "Vernier Software & Technology"
0x02   0x0409  "Go! Motion ver 1.02"

------------------------------

Connection path for device:
Contrôleur d’hôte compatible xHCI USB
Root Hub
Go! Motion ver 1.02 (VID=0x08F7 PID=0x0004) Port: 1

Running on: Windows 10 or greater

Brought to you by TDD v2.11.0, Mar 26 2018, 09:54:50


Le TI-CBR2 utilise donc :
  • l'identifiant vendeur 0x8F7, qui bizarrement ne correspond pas à Texas Instruments mais à Vernier
  • l'identifiant produit 0x004

Et justement, tout aussi bizarrement, il ne fournit pas comme nom TI-CBR2, mais Go! Motion ver 1.02. :#roll#:

Nous découvrons en fait rapidement que le Go! Motion est en fait le nom d'un autre sonar de chez Vernier, en tous points identique.

Voici donc enfin découvert et révélé l'ultime secret du TI-CBR2, il s'agit en fait d'un Vernier Go! Motion maquillé dans un boîtier estampillé Texas Instruments.
Image
User avatar
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Level up: 41.8%
 
Posts: 41470
Images: 14480
Joined: 25 Oct 2008, 00:00
Location: Montpellier
Gender: Male
Calculator(s):
MyCalcs profile
YouTube: critor3000
Twitter: critor2000
GitHub: critor

Return to News Divers

Who is online

Users browsing this forum: No registered users and 30 guests

-
Search
-
Social TI-Planet
-
Featured topics
Comparaisons des meilleurs prix pour acheter sa calculatrice !
Aidez la communauté à documenter les révisions matérielles en listant vos calculatrices graphiques !
Phi NumWorks jailbreak
123
-
Donations / Premium
For more contests, prizes, reviews, helping us pay the server and domains...
Donate
Discover the the advantages of a donor account !
JoinRejoignez the donors and/or premium!les donateurs et/ou premium !


Partner and ad
Notre partenaire Jarrety Calculatrices à acheter chez Calcuso
-
Stats.
1268 utilisateurs:
>1252 invités
>11 membres
>5 robots
Record simultané (sur 6 mois):
6892 utilisateurs (le 07/06/2017)
-
Other interesting websites
Texas Instruments Education
Global | France
 (English / Français)
Banque de programmes TI
ticalc.org
 (English)
La communauté TI-82
tout82.free.fr
 (Français)