π
<-
Chat plein-écran
[^]

[Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Regroupement de tous les tutoriaux Nspire.

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Unread postby critor » 05 Apr 2021, 18:38

I've rebuilt nLoader with support for the latest OS+Ndless 4.5.4.
If you'd like to use OS 4.5.4 on a calculator already running nLoader, you have to update in the following order :
  1. Ndless
  2. nLoader
  3. OS


The CAS .bin image has been tested on the following setups :
  • TI-Nspire CX CAS
    , hardware revision
    W
    ,
    Boot1.5
    version
    4.4.0
    ,
    Boot2
    version
    4.4.0
    ,
    OS
    version
    4.5.3
  • TI-Nspire CX CAS
    , hardware revision
    W
    ,
    Boot1.5
    version
    4.4.0
    ,
    Boot2
    version
    4.4.0
    ,
    OS
    version
    4.5.4

The non-CAS .bin image is untested.

So the updated supported OS versions list is
3.6
,
4.4.0
,
4.5.0
,
4.5.3
and
4.5.4
.

Since there has been no issues reported regarding my previous build adding OS+Ndless 4.5.3 support, I'm going to link to these newer files in the how-to.
Attachments
nLoader454.zip
(644.52 KiB) Downloaded 27 times
nLoader_NONCAS_OS.bin.tns
(227.07 KiB) Downloaded 63 times
nLoader_CAS_OS.bin.tns
(227.36 KiB) Downloaded 96 times
Image
User avatar
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Level up: 19.5%
 
Posts: 38368
Images: 11132
Joined: 25 Oct 2008, 00:00
Location: Montpellier
Gender: Male
Calculator(s):
YouTube: critor3000
Twitter: critor2000
Facebook: critor.ti
GitHub: critor

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Unread postby SuperXX » 11 Jul 2021, 22:06

BEFORE YOU READ: If you had a problem like this is because Boot 1.5 has been updated and you dind´t reflashed the Boot 1.5 which makes nLoader not to work. When you are updating nLoader and the OS, don´t just ignore step E. As you can see it cost me a LOT


Hi, I used to use nLoader in OS 4.4 but today I´ve decided to update to OS 4.5.3.14 when I saw that update above.

Now that I´ve updated the OS and created the new nLoader boot with nMaker and those files and flashed it, no my calculator gets stuck on 10% boot!

I´ve tried starting with the diags method ( :nsme: + :nsmo: + :nses: ) but it´s not working, the calculator reaches 10% of the bar and then shuts down. I can´t seem to be able to enter the maintenance menu either.

Edit:Nevermind, I just ended up buying a USB-TTL device to flash the Boot 2 into the calculator. I´m just leaving this as a issue warning.
Last edited by SuperXX on 03 Aug 2021, 12:27, edited 2 times in total.
User avatar
SuperXXMembre
Niveau 6: SM (Super Membre)
Niveau 6: SM (Super Membre)
Level up: 57.1%
 
Posts: 40
Joined: 15 May 2021, 10:25
Gender: Male
Calculator(s):

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Unread postby axegrinder69 » 28 Jul 2021, 15:28

Hi, is it possible to use nLoader in conjunction with Ti Nspire CX II? Or is there a different software altogether?
User avatar
axegrinder69Membre
Niveau 3: MH (Membre Habitué)
Niveau 3: MH (Membre Habitué)
Level up: 12%
 
Posts: 8
Joined: 24 Jul 2021, 15:33
Gender: Not specified
Calculator(s):

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Unread postby Lionel Debroux » 28 Jul 2021, 15:30

Preliminary checks :

  • P1)
    Check that your calculator is a
    TI-Nspire CX
    ,
    TI-Nspire CX CAS
    ,
    TI-Nspire CX-C
    or
    TI-Nspire CX-C CAS
    .
Membre de la TI-Chess Team.
Co-mainteneur de GCC4TI (documentation en ligne de GCC4TI), TIEmu et TILP.
User avatar
Lionel DebrouxSuper Modo
Niveau 14: CI (Calculateur de l'Infini)
Niveau 14: CI (Calculateur de l'Infini)
Level up: 9.8%
 
Posts: 6745
Joined: 23 Dec 2009, 00:00
Location: France
Gender: Male
Calculator(s):
Class: -
GitHub: debrouxl

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Unread postby axegrinder69 » 28 Jul 2021, 15:48

Hence the follow up question - is there a different software altogether for installing a similar software on the CX II platform?
User avatar
axegrinder69Membre
Niveau 3: MH (Membre Habitué)
Niveau 3: MH (Membre Habitué)
Level up: 12%
 
Posts: 8
Joined: 24 Jul 2021, 15:33
Gender: Not specified
Calculator(s):

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Unread postby critor » 28 Jul 2021, 19:38

Sorry, nothing similar for the CX II as far as I know.
Image
User avatar
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Level up: 19.5%
 
Posts: 38368
Images: 11132
Joined: 25 Oct 2008, 00:00
Location: Montpellier
Gender: Male
Calculator(s):
YouTube: critor3000
Twitter: critor2000
Facebook: critor.ti
GitHub: critor

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Unread postby SuperXX » 03 Aug 2021, 12:42

Does anyone know how I can have startup apps to work?

If I have anything in /documents/ndless/startup, my calculator will stay stuck in the clock icon during boot, unless I keep the :nses: key pressed.

At first I thinked it was just ndless fault, which in OS 4.4 also was and made my calculator enter a bootloop.

But now with OS 4.5.0 the issue persits but only for the nLoalder side. If I install Ndless without nLoader with things in the startup folder in OS 4.5.0 it will work. Contrary to OS 4.4.

Additional:It doesn´t metter if the app presents the "Compatibility mode" screen. It will always get stuck in clock boot
User avatar
SuperXXMembre
Niveau 6: SM (Super Membre)
Niveau 6: SM (Super Membre)
Level up: 57.1%
 
Posts: 40
Joined: 15 May 2021, 10:25
Gender: Male
Calculator(s):

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Unread postby critor » 03 Aug 2021, 12:47

What did you put in /ndless/startup/ ?
Image
User avatar
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Level up: 19.5%
 
Posts: 38368
Images: 11132
Joined: 25 Oct 2008, 00:00
Location: Montpellier
Gender: Male
Calculator(s):
YouTube: critor3000
Twitter: critor2000
Facebook: critor.ti
GitHub: critor

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Unread postby SuperXX » 03 Aug 2021, 14:10

Here is a list:

OS 4.4 only:

nClock:Didn´t test on OS 4.5 because nClock doesn´t even present the clock on the main screen so it´s not worth it for me to try

Both OS:

nPDF:I know it takes some time for nPDF to open succesfully, but 5 minutes passed and still the clock is still stuck

nDoom

crafti

These last two were only to test it.
User avatar
SuperXXMembre
Niveau 6: SM (Super Membre)
Niveau 6: SM (Super Membre)
Level up: 57.1%
 
Posts: 40
Joined: 15 May 2021, 10:25
Gender: Male
Calculator(s):

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Unread postby critor » 03 Aug 2021, 14:15

nClock isn't compatible with versions 4.4+.

nPDF, nDoom and crafti aren't startup programs, you shouldn't put them in the /ndless/startup/ folder.
Image
User avatar
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Level up: 19.5%
 
Posts: 38368
Images: 11132
Joined: 25 Oct 2008, 00:00
Location: Montpellier
Gender: Male
Calculator(s):
YouTube: critor3000
Twitter: critor2000
Facebook: critor.ti
GitHub: critor

PreviousNext

Return to Tutoriaux

Who is online

Users browsing this forum: No registered users and 5 guests

-
Search
-
Social
-
Featured topics
Concours de rentrée 2021 - La Geste d'Alrys
Concours de rentrée 2021 - Synchro-donjon !
Comparaisons des meilleurs prix pour acheter sa calculatrice !
Remplace ton ancienne fx-92 Collège ou Graph 35 par la nouvelle Graph 35+E II programmable en Python ! Pour tout achat d'une nouvelle Graph 35 d'ici le 30 septembre 2021, Casio te rembourse 10€. En cas de retour de ta fx-92 Collège c'est 18€, et même ou 23€ si tu retournes ton ancienne Graph 35. Etiquette de retour fournie, pas de frais de port à payer, même les anciens modèles et machines non fonctionnelles sont acceptées. En partenariat avec les Restos du cœur.
Remplace ton ancienne fx-92 Collège ou Graph 35 par la Graph 90+E couleur. Pour tout achat, Casio te rembourse 10€ en cas de retour de ta fx-92 Collège, ou 15€ en cas de retour de ta Graph 35. Etiquette de retour fournie, pas de frais de port à payer, même les anciens modèles et machines non fonctionnelles sont acceptées. En partenariat avec les Restos du coeur.
10€ remboursés par Casio sur l'achat de ta calculatrice Graph 35 d'ici le 30 Septembre 2021
Reprise de ton ancienne fx-92 Collège à 5€ ou Graph 35 à 10€. Même non fonctionnelle ou ancien modèle. Etiquette de retour fournie, pas de frais de port à payer. En partenariat avec les Restos du coeur.
25€ remboursés par Casio sur l'achat de ta calculatrice fx-CP400 d'ici le 31 Octobre 2021
3€ remboursés par Casio sur l'achat de ta calculatrice fx-92 Collège d'ici le 30 Septembre 2021
Casio Graph 90+E ou Graph 35+E II avec couvercle personnalisé à gagner sur simple participation aux formations Casio de Septembre 2021.
Disque dur externe + écouteurs bluetooth + 2 superbes coques personnalisées pour Graph 90+E ou Graph 35+E II à gagner en répondant d'ici le 24 Septembre 2021 à la question : "Quelle est l'unité de tension électrique ?"
Coque NumWorks édition limitée Septembre 2021 à gagner.
123456789101112
-
Donations / Premium
For more contests, prizes, reviews, helping us pay the server and domains...
Donate
Discover the the advantages of a donor account !
JoinRejoignez the donors and/or premium!les donateurs et/ou premium !


Partner and ad
Notre partenaire Jarrety Calculatrices à acheter chez Calcuso
-
Stats.
488 utilisateurs:
>476 invités
>6 membres
>6 robots
Record simultané (sur 6 mois):
6892 utilisateurs (le 07/06/2017)

-
Other interesting websites
Texas Instruments Education
Global | France
 (English / Français)
Banque de programmes TI
ticalc.org
 (English)
La communauté TI-82
tout82.free.fr
 (Français)