π
<-
Chat plein-écran
[^]

[Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Regroupement de tous les tutoriaux Nspire.

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude Qswedr » 13 Nov 2019, 21:25

I tried tinspirecx_4.4.0.532.tco and tinspirecx_4.5.2.8.tco
Both did the same thing.
Avatar de l’utilisateur
Qswedr
Niveau 5: MO (Membre Overclocké)
Niveau 5: MO (Membre Overclocké)
Prochain niv.: 60%
 
Messages: 7
Inscription: 13 Nov 2019, 02:21
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude critor » 13 Nov 2019, 21:30

Ok. Could you try to install OS 4.4 again ?
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.4%
 
Messages: 41455
Images: 14353
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude Qswedr » 13 Nov 2019, 22:10

It won't let me. It says I can't install an older software
Avatar de l’utilisateur
Qswedr
Niveau 5: MO (Membre Overclocké)
Niveau 5: MO (Membre Overclocké)
Prochain niv.: 60%
 
Messages: 7
Inscription: 13 Nov 2019, 02:21
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude critor » 13 Nov 2019, 22:29

Thanks, I was fearing this.
That's because you tried OS 4.5.2, which just locked your calculator.

Then I'm sorry, you cannot install an OS older than 4.5.2 anymore.
Which means you can't install Ndless anymore, you can't fix things through software, you can't complete nLoader setup...

Try to install OS 4.5.2 again (there is nothing else to try anyway now), and see if it still reboots and uninstalls itself (be sure to hold :nses: :nsme: :nsmo: at the screen with the clock).
If it still does, then the only way out I can think of will be to reflash the Boot2 partition through a cheap USB/TTL interface :
39
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.4%
 
Messages: 41455
Images: 14353
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude Qswedr » 13 Nov 2019, 22:52

Can you point me to the right one to buy? Like Amazon link or something like that. I would really appreciate
Avatar de l’utilisateur
Qswedr
Niveau 5: MO (Membre Overclocké)
Niveau 5: MO (Membre Overclocké)
Prochain niv.: 60%
 
Messages: 7
Inscription: 13 Nov 2019, 02:21
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude IanHrbruh » 20 Déc 2019, 03:30

Hey, does this method work on Ti Nspire CX revision AE? Mine is on OS version 4.5.0. The boot1 version is 4.0.1.43 and the boot2 version is 4.4.0.8, and the model number on the back is N-1118AE if that helps.
Avatar de l’utilisateur
IanHrbruh
Niveau 0: MI (Membre Inactif)
Niveau 0: MI (Membre Inactif)
Prochain niv.: 0%
 
Messages: 1
Inscription: 20 Déc 2019, 03:23
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile
Twitter/X: Lddqd_

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude parrotgeek1 » 10 Déc 2020, 23:25

[removed]
Dernière édition par parrotgeek1 le 16 Nov 2021, 02:17, édité 6 fois.
Avatar de l’utilisateur
parrotgeek1Programmeur
Niveau 11: LV (Légende Vivante)
Niveau 11: LV (Légende Vivante)
Prochain niv.: 88%
 
Messages: 745
Inscription: 29 Mar 2016, 01:22
Localisation: This account is no longer used.
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude GraphicHealer » 14 Jan 2021, 19:58

Ok, sooo I followed this tutorial to the letter, and my AB revision ti Nspire CX (non CAS) will not boot the nLdr partition. It gets stuck at 10% as seen below:

Image

I used the diag boot combination :nses: :nsmo: :nsme: to boot to the working boot partition. I then undid and uninstalled everything after trying like 3 different supported OSes (4.5.3, 4.5.0, 4.4.0) to see if OS version was the issue. Still froze there after like 10 tries building the nloader image.

What do I do now??

Please help. I really want the CAS functionality on my non-CAS nspire CX if I can.
Avatar de l’utilisateur
GraphicHealer
Niveau 2: MI2 (Membre Initié)
Niveau 2: MI2 (Membre Initié)
Prochain niv.: 80%
 
Messages: 2
Inscription: 14 Jan 2021, 19:45
Genre: Homme
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude critor » 14 Jan 2021, 21:23

Anyway you won't be able to use CAS on a non-CAS TI-Nspire CX anymore.
The CAS patchers needed for OS versions 3.9+ were permanently removed from github.

A 10% freeze is quite strange, doesn't ring a bell here.
It would mean the calculator is still in the Boot1, and apparently there is no error icon and no error message...

Did you try the reset button on the back ?

You can also try to boot from the diags partition :
  • hold :nses: :nsme: :nsmo:
  • without releasing the keys press and release the reset button on the back
  • if the calculator doesn't turn back ong automatically, still without releasing the keys type :nsho: and twice if needed
Does this change anything ?
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.4%
 
Messages: 41455
Images: 14353
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude GraphicHealer » 14 Jan 2021, 21:28

I did boot from the DIAGS part to get back to the OS, then I flashed the stock boot partitions by extracting them from the .tns for the firmware and flashing the boot2 image with BtMg. Its now running stock firmware and OS on 4.5.3 at the moment.

I just have tried this many times, and it never gets past that 10% on nLoader.
Avatar de l’utilisateur
GraphicHealer
Niveau 2: MI2 (Membre Initié)
Niveau 2: MI2 (Membre Initié)
Prochain niv.: 80%
 
Messages: 2
Inscription: 14 Jan 2021, 19:45
Genre: Homme
Calculatrice(s):
MyCalcs profile

PrécédenteSuivante

Retourner vers Tutoriaux

Qui est en ligne

Utilisateurs parcourant ce forum: Bing [Bot] et 3 invités

-
Rechercher
-
Social TI-Planet
-
Sujets à la une
Comparaisons des meilleurs prix pour acheter sa calculatrice !
Aidez la communauté à documenter les révisions matérielles en listant vos calculatrices graphiques !
Phi NumWorks jailbreak
123
-
Faire un don / Premium
Pour plus de concours, de lots, de tests, nous aider à payer le serveur et les domaines...
Faire un don
Découvrez les avantages d'un compte donateur !
JoinRejoignez the donors and/or premium!les donateurs et/ou premium !


Partenaires et pub
Notre partenaire Jarrety Calculatrices à acheter chez Calcuso
-
Stats.
756 utilisateurs:
>742 invités
>9 membres
>5 robots
Record simultané (sur 6 mois):
6892 utilisateurs (le 07/06/2017)
-
Autres sites intéressants
Texas Instruments Education
Global | France
 (English / Français)
Banque de programmes TI
ticalc.org
 (English)
La communauté TI-82
tout82.free.fr
 (Français)