π
<-
Chat plein-écran
[^]

delete NAND images

C, C++, ASM...

delete NAND images

Message non lude geekpersonman » 22 Mai 2017, 04:30

I don't know if this question exactly fits here, but I think this is the best fit so I'll ask anyway.

I installed linux (the ControlX way) on my calculator and wish to remove it to reclaim space. I have tried BtMg, and nsNandMgr, where I cannot find a method deleting things, and nspartmanagic where it will not let me expand FileS to overwrite the linux image.
Im guessing this has been done for safety reasons, but I know what's important and don't think I am clueless/stupid enough (just barely) to delete it. How do I (or what software should I use) to achieve what I want to do?
Avatar de l’utilisateur
geekpersonman
Niveau 6: SM (Super Membre)
Niveau 6: SM (Super Membre)
Prochain niv.: 7.1%
 
Messages: 47
Inscription: 21 Aoû 2015, 01:45
Genre: Homme
Calculatrice(s):
MyCalcs profile

Re: delete NAND images

Message non lude critor » 22 Mai 2017, 09:02

All these were safety features, developed when we only had 1 image per partition (and so problems/bricks if the only image was destroyred).

The :nses: :nsme: :nsmo: boot combo can be used to completely wipe out the Diags+ExtnD partitions content, and then nsPartManagic should accept to resize them.
But this is also going to remove ControlX, so you need to get sure your calculator will be able to boot without ControlX.

With BtMg, you may also inject small images at the start of the ExtnD partition.
If the Linux image is then pushed across the end of the ExtnD partition it will just disappear.
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41468
Images: 14480
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: delete NAND images

Message non lude the_blaggyS » 11 Avr 2019, 20:31

I'm using a ti nSpire CX with OS 3.6.0.550 and this key combo isn't working for me, is a menu supposed to pop up? For me nothing happens, also checked BtMg and the partitions are still filled.
Thanks for help!
Avatar de l’utilisateur
the_blaggyS
Niveau 3: MH (Membre Habitué)
Niveau 3: MH (Membre Habitué)
Prochain niv.: 12%
 
Messages: 12
Inscription: 11 Avr 2019, 20:26
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: delete NAND images

Message non lude critor » 11 Avr 2019, 20:54

esc+menu+minus switches the boot image, so the behavior depends on your setup.

Sharing a picture of your BtMg home screen will help us.
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41468
Images: 14480
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: delete NAND images

Message non lude the_blaggyS » 13 Avr 2019, 00:44

That's a good idea, there's just one problem, I boot looped my calculator right now.
Maybe you can help me with this too.
I set the boot partition to boot2 instead of diags in BtMg and know it always restarts if the loading bar is nearly full, after 'Loading Operation System...'/

But I remember my flashed images:
In the manuf area I had the manuf image from nBoot 3.00.99 installed,
In the Boot2 section i had boot1.5 and boot2 both version 4.0.3.49,
in diags I had firstly ControlX 4.5 and the second one was the original diags images,
in the extended section I had two copies of boot2 v4.0.3.49.

I already tried the repartitioning option from maintance menu and installed OS 3.6 for CX, it is actually a CX calculator.
With the key combination you posted on top I get a slightly different loading screen, but then it has a gearwheel with an attention sign on the top left corner. And the loading bar just stays in the beginning and isn't increasing.
The 'default' loading screen is only black and white, in the middle is the black loading bar, under it the text what it is doing right now and on the top the ti nSpire logo.
Dernière édition par the_blaggyS le 13 Avr 2019, 01:45, édité 2 fois.
Avatar de l’utilisateur
the_blaggyS
Niveau 3: MH (Membre Habitué)
Niveau 3: MH (Membre Habitué)
Prochain niv.: 12%
 
Messages: 12
Inscription: 11 Avr 2019, 20:26
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: delete NAND images

Message non lude critor » 13 Avr 2019, 01:26

Thanks.

So, holding :nses: :nsme: :nsmo: before a reset/reboot doesn't trigger the ControlX menu ?
Try holding :nsct: too before a reset/reboot.
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41468
Images: 14480
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: delete NAND images

Message non lude the_blaggyS » 13 Avr 2019, 01:46

I escaped the boot loop by installing OS 4.5 and then downgrading back to 3.6 after changing boot partition back to diags.

But next time I will try the one with holding control before boot. Thank you!
I can't say if it triggered the ControlX menu, since I patched it in order to suppress the output at boot, maybe that wasn't the best idea.

Now I have an actual picture of BtMg:
Image
There I would like to get rid of the second boot2 image in the extended partition
Avatar de l’utilisateur
the_blaggyS
Niveau 3: MH (Membre Habitué)
Niveau 3: MH (Membre Habitué)
Prochain niv.: 12%
 
Messages: 12
Inscription: 11 Avr 2019, 20:26
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: delete NAND images

Message non lude critor » 13 Avr 2019, 02:10

Ok, thanks you very much for making your setup perfectly clear.

So now that you're able to boot, what would you like to achieve ?
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41468
Images: 14480
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: delete NAND images

Message non lude the_blaggyS » 13 Avr 2019, 02:57

I have to thank you that you are helping me.

Actually I just want to remove the doubled boot2 entry in the extended area.
And I thought about it if the boot2 image needs to be at all in the extended area, since it's at default already in the boot2 area. Or is this not working because the boot1.5 gets booted before?
Avatar de l’utilisateur
the_blaggyS
Niveau 3: MH (Membre Habitué)
Niveau 3: MH (Membre Habitué)
Prochain niv.: 12%
 
Messages: 12
Inscription: 11 Avr 2019, 20:26
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: delete NAND images

Message non lude critor » 13 Avr 2019, 08:48

You're welcome.

Currently BtMg doesn't provide a way to delete images, since it would be very dangerous without various checks.

The only way without modifying or developing such tool is to wipe out everything :
  • uninstall nBoot from the ControlX boot menu
  • then wipe out the Diags+ExtendeD partition with the :nsdo: :enter: :nsmo: boot combo
  • then reinstall nBoot+ControlX
  • reflash a Diags image in the Diags partition since it can be useful with some issues

At least one Boot2 4.0.3 image needs to be in the ExtendeD partition for several reasons :
  • because this version is mandatory to boot properly in the nBoot+ControlX context
  • because the Boot2 partition is not a sage location, since if you ever install an unsupported/newer OS it might update the Boot2, and then make you run into booting issues in the nBoot context
  • because there isn't enough free space in the Diags partition
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41468
Images: 14480
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Suivante

Retourner vers Native: Ndless, Linux, ...

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 9 invités

-
Rechercher
-
Social TI-Planet
-
Sujets à la une
Comparaisons des meilleurs prix pour acheter sa calculatrice !
Aidez la communauté à documenter les révisions matérielles en listant vos calculatrices graphiques !
Phi NumWorks jailbreak
123
-
Faire un don / Premium
Pour plus de concours, de lots, de tests, nous aider à payer le serveur et les domaines...
Faire un don
Découvrez les avantages d'un compte donateur !
JoinRejoignez the donors and/or premium!les donateurs et/ou premium !


Partenaires et pub
Notre partenaire Jarrety Calculatrices à acheter chez Calcuso
-
Stats.
1075 utilisateurs:
>1053 invités
>18 membres
>4 robots
Record simultané (sur 6 mois):
6892 utilisateurs (le 07/06/2017)
-
Autres sites intéressants
Texas Instruments Education
Global | France
 (English / Français)
Banque de programmes TI
ticalc.org
 (English)
La communauté TI-82
tout82.free.fr
 (Français)