π
<-
Chat plein-écran
[^]

[Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linux)

Regroupement de tous les tutoriaux Nspire.

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Unread postby KoolDude214 » 20 Jul 2019, 18:47

Lionel Debroux wrote:Which OS are you running this from ? "FIND: Parameter format not correct" doesn't ring a bell to me.


Originally I was running this from Windows, but I forgot about the Ndless SDK. Hence, I've switched to WSL (Linux subsystem)




critor wrote:@KoolDude214
If I remember well, the red floppy disk image is only displayed when something got saved to the flash.

make is ok, but you need to install the Ndless SDK first :
https://github.com/ndless-nspire/Ndless ... troduction


Ah, sounds good! I'm building the toolchain as I write this. One question though, the floppy disk appears even if I don't do anything and just use the reset button on the calculator. Nothing should have been saved in such a scenario, right?
User avatar
KoolDude214
Niveau 4: MC (Membre Confirmé)
Niveau 4: MC (Membre Confirmé)
Level up: 18.8%
 
Posts: 2
Joined: 19 Jan 2019, 18:45
Gender: Not specified

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Unread postby bruhmoment » 29 Aug 2019, 00:06

Thank you for the guide, it was very helpful.
I apologize if this has already been posted somewhere but could you guide me on uninstalling nboot and controlx, essentially returning the calculator to the stock form?
User avatar
bruhmoment
Niveau 0: MI (Membre Inactif)
Niveau 0: MI (Membre Inactif)
Level up: 0%
 
Posts: 1
Joined: 28 Aug 2019, 23:53
Gender: Not specified

Online

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Unread postby critor » 24 Oct 2019, 00:02

ControlX updated to v. 5.0.2 :
archives_voir.php?id=652778

Added support for CX & CX CAS OS 4.5.2.
Unlike with OS 4.5.1, there is no Ndless support for OS 4.5.2 yet. So you shouldn't update your OS to 4.5.2 unless you're forced to.

Disabled support for CX OS 4.5.0.845
(or the CX payload becomes too big for Boot2 4.0.3.43)
.
Image
User avatar
critorAdmin.
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Level up: 0.1%
 
Posts: 34200
Images: 8860
Joined: 25 Oct 2008, 00:00
Location: Montpellier
Gender: Male
Calculator(s):
Class: Lycée
YouTube: critor3000
Twitter: critor2000
Facebook: critor.ti

Online

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Unread postby critor » 24 Oct 2019, 12:50

bruhmoment wrote:Thank you for the guide, it was very helpful.
I apologize if this has already been posted somewhere but could you guide me on uninstalling nboot and controlx, essentially returning the calculator to the stock form?


Unlike with nLoader, to my knowledge there is currently no good reason to uninstall
nBoot
+
ControlX
.
Moreover it's dangerous : the calculator might become unable to boot depending on the state of your boot partitions, and no automatic checks were developed for this.

So what's your issue with
nBoot
+
ControlX
so we can address it ?
Thanks.
Image
User avatar
critorAdmin.
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Level up: 0.1%
 
Posts: 34200
Images: 8860
Joined: 25 Oct 2008, 00:00
Location: Montpellier
Gender: Male
Calculator(s):
Class: Lycée
YouTube: critor3000
Twitter: critor2000
Facebook: critor.ti

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Unread postby fdlb » 05 Nov 2019, 20:21

Bonjour,

J'ai essayé d'installer nBoot + ControlX, j'ai bien réussi à installer nBoot, néanmoins lors de l'installation de ControlX, le fichier controlx.img.tns ne voulait pas se lancer sur la calculatrice (erreur fichier non valide??).

Je l'ai donc redémarré, et là, catastrophe... Elle démarre avec une barre chargement avec un fond blanc écrit "Ti=I-nSpire". Mais arrivé au milieu du chargement elle reboot. Et elle n'est plus reconnu sur mon pc...

J'ai essayé le reset mais j'ai un black screen (rien ne s'affiche, comme si elle était éteinte, et je pense que c'est le cas..)

Je pense bien que j'ai tué la calculatrice non ? :'(
User avatar
fdlbPremium
Niveau 0: MI (Membre Inactif)
Niveau 0: MI (Membre Inactif)
Level up: 0%
 
Posts: 2
Joined: 29 Oct 2019, 15:47
Gender: Not specified

Online

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Unread postby critor » 05 Nov 2019, 20:46

Pas complètement.

Il est possible d'installer ControlX via une interface USB/TTL :
39
Image
User avatar
critorAdmin.
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Level up: 0.1%
 
Posts: 34200
Images: 8860
Joined: 25 Oct 2008, 00:00
Location: Montpellier
Gender: Male
Calculator(s):
Class: Lycée
YouTube: critor3000
Twitter: critor2000
Facebook: critor.ti

Previous

Return to Tutoriaux

Who is online

Users browsing this forum: No registered users and 0 guests

-
Search
-
Featured topics
Omega, le fork étendant les capacités de ta NumWorks, même en mode examen !
Comparaisons des meilleurs prix pour acheter sa calculatrice !
Concours TI-Planet-Casio de rentrée 2019. 3 défis pour plus d'une 15aine de calculatrices graphiques et nombre de goodies sortant de l'ordinaire ! :D
123
-
Donations / Premium
For more contests, prizes, reviews, helping us pay the server and domains...

Discover the the advantages of a donor account !
JoinRejoignez the donors and/or premium!les donateurs et/ou premium !


Partner and ad
Notre partenaire Jarrety 
-
Stats.
812 utilisateurs:
>784 invités
>22 membres
>6 robots
Record simultané (sur 6 mois):
6892 utilisateurs (le 07/06/2017)
-
Other interesting websites
Texas Instruments Education
Global | France
 (English / Français)
Banque de programmes TI
ticalc.org
 (English)
La communauté TI-82
tout82.free.fr
 (Français)