π
<-
Chat plein-écran
[^]

[Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linux)

Regroupement de tous les tutoriaux Nspire.

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude critor » 28 Nov 2018, 12:54

What's your calculator hardware revision ?
It's shown on the back in the datestamp printed at the right of the serial number.
In your case the datestamp should end with W, X, Y, Z, AA, AB...

Thanks.
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.4%
 
Messages: 41455
Images: 14353
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude PaulR282 » 28 Nov 2018, 13:58

It's AA
Avatar de l’utilisateur
PaulR282
Niveau 0: MI (Membre Inactif)
Niveau 0: MI (Membre Inactif)
Prochain niv.: 0%
 
Messages: 4
Inscription: 27 Nov 2018, 17:38
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude critor » 28 Nov 2018, 14:39

Thanks.

On hardware revision AA (X+), the Boot1 4.0.1 is inside the proprietary ASIC chip.
We don't know if it can be reflashed, and should it be the case we don't know how to. :(
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.4%
 
Messages: 41455
Images: 14353
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude PaulR282 » 28 Nov 2018, 15:04

critor a écrit:Thanks.

On hardware revision AA (X+), the Boot1 4.0.1 is inside the proprietary ASIC chip.
We don't know if it can be reflashed, and should it be the case we don't know how to. :(


ok, thats really bad, but big thanks for the information :)
Avatar de l’utilisateur
PaulR282
Niveau 0: MI (Membre Inactif)
Niveau 0: MI (Membre Inactif)
Prochain niv.: 0%
 
Messages: 4
Inscription: 27 Nov 2018, 17:38
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude eriks » 03 Jan 2019, 02:26

Hello - thanks all, especially critor, for this impressive body of work
Dernière édition par eriks le 03 Jan 2019, 17:27, édité 1 fois.
Avatar de l’utilisateur
eriks
Niveau 2: MI2 (Membre Initié)
Niveau 2: MI2 (Membre Initié)
Prochain niv.: 26.7%
 
Messages: 5
Inscription: 03 Jan 2019, 02:06
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude critor » 03 Jan 2019, 11:23

I think I have some a similar issue with nBoot on an old hardware revision C or D.
When turned on, the screen is strange, as if the refresh frequency was lower, and the luminosity too.

Note this calculator is still working.

No such issue with the more recent hardware revisions I have.

So something is interfering, but sorry I don't know what.
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.4%
 
Messages: 41455
Images: 14353
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude Cgoat3 » 18 Jan 2019, 21:27

Hello everyone! I’m new here and need expert advice on how to install Linux onto my nspire cx cas. I have downloaded nboot, loaded controlx and when i tried to load the Linux.tns file onto my calc I got this error on The interface “Source image exceeds area and has been rejected. Choose higher dest location”
I’m not technologically savvy.

Any help would be greatly appreciated, preferably with screenshots. Thank you SO much for your time.

Charlie
Avatar de l’utilisateur
Cgoat3
Niveau 2: MI2 (Membre Initié)
Niveau 2: MI2 (Membre Initié)
Prochain niv.: 80%
 
Messages: 9
Inscription: 18 Jan 2019, 21:15
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude critor » 18 Jan 2019, 21:32

Hi.

Could you share a capture/picture of the BtMg home screen so we can check ?

Thanks.
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.4%
 
Messages: 41455
Images: 14353
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude zyge » 05 Mar 2019, 05:29

Help! I finished the install a long time ago, it worked perfectly. But after a charging, my TI-nspire ca cas is stuck at the loading screen. like in the link.

Avatar de l’utilisateur
zyge
Niveau 3: MH (Membre Habitué)
Niveau 3: MH (Membre Habitué)
Prochain niv.: 4%
 
Messages: 13
Inscription: 05 Mar 2019, 05:23
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude critor » 05 Mar 2019, 07:51

Hi !

It's a TI-Nspire OS bug with the SRAM, it may happen from time to time, even without nBoot/ControlX/Ndless.

Here's a way out :
  • press and hold the reset button
  • press and hold the :nsct: key
  • release te reset button
  • if the calculator doesn't automatically turn on, press :nsho:
  • release all keys
  • you should be at the ControlX menu
  • press :ns3: to browse the Diags partition
  • look for a diagnostic software and launch it - if present, it should be by pressing :ns2:
  • the diagnostic software may report you a GPIO error, in this case press :nses: to confirm the fix
  • once at the diagnostic software home menu, just press and release the reset button on the back
  • the OS should now start normally

Here's another way if you can't find a diagnostic software, but you'll need a screwdriver : just disconnect the rechargeable battery for some seconds.
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.4%
 
Messages: 41455
Images: 14353
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

PrécédenteSuivante

Retourner vers Tutoriaux

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 4 invités

-
Rechercher
-
Social TI-Planet
-
Sujets à la une
Comparaisons des meilleurs prix pour acheter sa calculatrice !
Aidez la communauté à documenter les révisions matérielles en listant vos calculatrices graphiques !
Phi NumWorks jailbreak
123
-
Faire un don / Premium
Pour plus de concours, de lots, de tests, nous aider à payer le serveur et les domaines...
Faire un don
Découvrez les avantages d'un compte donateur !
JoinRejoignez the donors and/or premium!les donateurs et/ou premium !


Partenaires et pub
Notre partenaire Jarrety Calculatrices à acheter chez Calcuso
-
Stats.
512 utilisateurs:
>499 invités
>8 membres
>5 robots
Record simultané (sur 6 mois):
6892 utilisateurs (le 07/06/2017)
-
Autres sites intéressants
Texas Instruments Education
Global | France
 (English / Français)
Banque de programmes TI
ticalc.org
 (English)
La communauté TI-82
tout82.free.fr
 (Français)
cron