π
<-
Chat plein-écran
[^]

I bricked both boot methods..

:32tins: :32tinsktpb: :32tinsktpn: :32tinscas: :32tinstpkc: :32tinstpktpb: :32tinstp: :32tinscastp: :32tinscmc: :32tinscx: :32tinscxcas:

I bricked both boot methods..

Message non lude Brinicle99 » 26 Mar 2020, 17:25

I tried to upgrade my Ti-Nspire CX to CAS and I bricked my calculator...
I reboot both normal way and the other one using ESC+MENU+(-) but both methods are all bricked.

When I normally press the reset button on the backside, it says "Operating System not found. Install OS now."
At this time, I tried to reinstall OS using my Ti Software but it still says Install OS even after I did.
When I press the three buttons and the reset button, it first notices me that the calculator has been modified to enable CAS but, during the loading, it stops and shows me the Red X circle.

I found that I need the USB to TTL Converter to fix this problem but it didn't tell me how I can fix using the convertor.

Can anyone give me a hand and save me from this issue?
https://imgur.com/a/uBOWjqX
Avatar de l’utilisateur
Brinicle99
Niveau 3: MH (Membre Habitué)
Niveau 3: MH (Membre Habitué)
Prochain niv.: 16%
 
Messages: 10
Inscription: 27 Fév 2018, 01:06
Genre: Homme
Calculatrice(s):
MyCalcs profile

Re: I bricked both boot methods..

Message non lude critor » 27 Mar 2020, 11:50

Very strange that you get the red X only when holding
esc
menu
-
.

Anyway, people who get the red X but did accurately follow the rest our tutorial usually have to hold
esc
menu
-
to get at the "Operating System not found. Install OS now." screen.
If they don't, they need the USB-TTL adapter to regain access to this screen.

You apparently still have access to this screen so you don't need anything else. Just send an OS.
Try with both CAS and non-CAS 4.5.0 OSes. It may not work.
If it doesn't work, then try both CAS and non-CAS 4.5.2 OSes. This time it should work.
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41467
Images: 14480
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: I bricked both boot methods..

Message non lude Brinicle99 » 28 Mar 2020, 15:27

critor a écrit:Very strange that you get the red X only when holding
esc
menu
-
.

Anyway, people who get the red X but did accurately follow the rest our tutorial usually have to hold
esc
menu
-
to get at the "Operating System not found. Install OS now." screen.
If they don't, they need the USB-TTL adapter to regain access to this screen.

You apparently still have access to this screen so you don't need anything else. Just send an OS.
Try with both CAS and non-CAS 4.5.0 OSes. It may not work.
If it doesn't work, then try both CAS and non-CAS 4.5.2 OSes. This time it should work.


Thank you for the reply.
I connected the calculator and installed OS on the calculator but it still shows the same notice that I need OS even after I installed it.

Image

This is why I mentioned USB-TTL adapter. So, do you know how to handle the adapter to regain access to the screen?
Avatar de l’utilisateur
Brinicle99
Niveau 3: MH (Membre Habitué)
Niveau 3: MH (Membre Habitué)
Prochain niv.: 16%
 
Messages: 10
Inscription: 27 Fév 2018, 01:06
Genre: Homme
Calculatrice(s):
MyCalcs profile

Re: I bricked both boot methods..

Message non lude critor » 28 Mar 2020, 15:55

The USB-TTL adapter purpose is to repair a broken/erased and thus non-working Boot2.
You apparently have a working Boot2 since you get to the "install OS" screen, so apparently there is no need for an USB-TTL adapter.

The problem is somewhere else.

Does the calculator reboot after the OS transfer is complete ?
Which OS version and type (CAS / non-CAS) did you try ?

Thanks.
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41467
Images: 14480
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: I bricked both boot methods..

Message non lude Brinicle99 » 28 Mar 2020, 19:58

Does the calculator reboot after the OS transfer is complete?
: Yes, it automatically rebooted after the OS transfer is complete but showed the same message. I also rebooted using the back button but it has the same issue.

Which OS version and type (CAS / non-CAS) did you try?
: I downloaded OS TI-Nspire CX and CX CAS with version 4.5.0.1180 and 4.5.2.8 from the Ti-planet OS category and tried with all of them.
My calculator couldn't detect CAS OS so I tried non-CAS OSs only
Avatar de l’utilisateur
Brinicle99
Niveau 3: MH (Membre Habitué)
Niveau 3: MH (Membre Habitué)
Prochain niv.: 16%
 
Messages: 10
Inscription: 27 Fév 2018, 01:06
Genre: Homme
Calculatrice(s):
MyCalcs profile

Re: I bricked both boot methods..

Message non lude critor » 28 Mar 2020, 20:25

Ok, thanks.

So try again with CX OS 4.5.0.
But before the end of the OS transfer and thus before the calculator reboots, try holding :nses: :nsme: :nsmo: (3 keys, no more), and don't release the keys before the reboot.
Tell us if it changes anything.

If CX OS 4.5.0 gives you an error popup on the computer, please try the same thing with CX OS 4.5.1 or 4.5.2.
Thanks.
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41467
Images: 14480
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: I bricked both boot methods..

Message non lude Brinicle99 » 28 Mar 2020, 21:53

Nothing changes. It still shows the red box when I boot using :nses: :nsme: :nsmo: buttons
I know there are two ways of booting. The normal boot still shows infinite ask for installing OS and another one shows red box.
I think I did something wrong when I set partition at first. So, it shows the red box. After that, I used :nses: :nsme: :nsmo: access to fix that issue. I expect I massed up the OS again and that is why both boots don't work anymore.
I'm not sure this will be helpful but I switched 'boot=Boot2 Diags' to 'boot=Diags Boot2' when I tried to install ControlX
:mmm:
Avatar de l’utilisateur
Brinicle99
Niveau 3: MH (Membre Habitué)
Niveau 3: MH (Membre Habitué)
Prochain niv.: 16%
 
Messages: 10
Inscription: 27 Fév 2018, 01:06
Genre: Homme
Calculatrice(s):
MyCalcs profile

Re: I bricked both boot methods..

Message non lude critor » 28 Mar 2020, 22:05

Thanks.

Did you try CX OS 4.5.0 ?
Did you get the red box with this version ?
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41467
Images: 14480
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: I bricked both boot methods..

Message non lude Brinicle99 » 28 Mar 2020, 22:13

Is CX OS 4.5.0 different with 4.5.0.1180 that I tried before?
I could only see 4.5.0.845 and 4.5.0.1180 versions
Avatar de l’utilisateur
Brinicle99
Niveau 3: MH (Membre Habitué)
Niveau 3: MH (Membre Habitué)
Prochain niv.: 16%
 
Messages: 10
Inscription: 27 Fév 2018, 01:06
Genre: Homme
Calculatrice(s):
MyCalcs profile

Re: I bricked both boot methods..

Message non lude critor » 28 Mar 2020, 22:17

It's 4.5.0.1180.

Can you retry 4.5.0.1180, hold :nses: :nsme: :nsmo: before the reboot, and then check if you still get the red box ?

Thanks.
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41467
Images: 14480
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Suivante

Retourner vers Problèmes divers / Aide débutants

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 24 invités

-
Rechercher
-
Social TI-Planet
-
Sujets à la une
Comparaisons des meilleurs prix pour acheter sa calculatrice !
Aidez la communauté à documenter les révisions matérielles en listant vos calculatrices graphiques !
Phi NumWorks jailbreak
123
-
Faire un don / Premium
Pour plus de concours, de lots, de tests, nous aider à payer le serveur et les domaines...
Faire un don
Découvrez les avantages d'un compte donateur !
JoinRejoignez the donors and/or premium!les donateurs et/ou premium !


Partenaires et pub
Notre partenaire Jarrety Calculatrices à acheter chez Calcuso
-
Stats.
2400 utilisateurs:
>2383 invités
>12 membres
>5 robots
Record simultané (sur 6 mois):
6892 utilisateurs (le 07/06/2017)
-
Autres sites intéressants
Texas Instruments Education
Global | France
 (English / Français)
Banque de programmes TI
ticalc.org
 (English)
La communauté TI-82
tout82.free.fr
 (Français)