π
<-
Chat plein-écran
[^]

[Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Regroupement de tous les tutoriaux Nspire.

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude critor » 02 Mar 2019, 09:36

Hi.

You likely made an error at step D when selecting the 2nd file to build the nLoader image.

  • hold :nses: :nsme: :nsmo:
  • without releasing these 3 keys, quickly press and release the reset button on the back
The calculator should boot normally.
Then resume at step D.
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41465
Images: 14479
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude ezpv2 » 02 Mar 2019, 09:45

just tried that combination, but it ended up bringing me to the diagnostics menu showing various tests?
20190302_013943.jpg
Avatar de l’utilisateur
ezpv2
Niveau 0: MI (Membre Inactif)
Niveau 0: MI (Membre Inactif)
Prochain niv.: 0%
 
Messages: 3
Inscription: 02 Mar 2019, 09:20
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude critor » 02 Mar 2019, 09:51

Then it seems you also didn't correctly follow the instructions at step C. :(

I'm sorry, your calculator is now semi-bricked and can't be repaired through software.

You'll need a cheap USB TTL interface to reflash the Boot2 partition :
39
ExtraPutty for example can then be used to send the new Boot2 image : http://www.extraputty.com/
Setup :
115200 baud.
Data bits: 8
Parity: Even
Stop bits: 1
Flow control: None
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41465
Images: 14479
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude ezpv2 » 02 Mar 2019, 10:07

hm thank you for the help. i'll purchase the USB TTL right away and retry the installation. thank you!
Avatar de l’utilisateur
ezpv2
Niveau 0: MI (Membre Inactif)
Niveau 0: MI (Membre Inactif)
Prochain niv.: 0%
 
Messages: 3
Inscription: 02 Mar 2019, 09:20
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude critor » 02 Mar 2019, 10:13

You're welcome; feel free to ask for further instructions when you receive it. :)
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41465
Images: 14479
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude T3KKAN » 28 Mar 2019, 02:01

Thanks for the guide. I bricked my AD model Nspire. Somehow i managed to boot the calculator by pressing the following keys " :nses: :nsme: :nsmo: " and the reset button, i can use the scratchpad for example but the calculator remains broken. If i press the reset button it gets stuck again in a loading screen with a error sign (cross in a red circle). Also the "Ndless installed" message disapeared and i cant open *.tns files. I tried installing the previous os by dragging it into the calculator using the link software, it installed but the same problems remains. I dont know what i did wrong on the installation. But if someone could tell me what to do as i cant boot the calculator, i would be very greatful if that means anything to you...
Avatar de l’utilisateur
T3KKAN
Niveau 0: MI (Membre Inactif)
Niveau 0: MI (Membre Inactif)
Prochain niv.: 0%
 
Messages: 3
Inscription: 28 Mar 2019, 01:48
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile
Classe: A mathematics, Geo, FQ

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude T3KKAN » 28 Mar 2019, 02:45

T3KKAN a écrit:Thanks for the guide. I bricked my AD model Nspire. Somehow i managed to boot the calculator by pressing the following keys " :nses: :nsme: :nsmo: " and the reset button, i can use the scratchpad for example but the calculator remains broken. If i press the reset button it gets stuck again in a loading screen with a error sign (cross in a red circle). Also the "Ndless installed" message disapeared and i cant open *.tns files. I tried installing the previous os by dragging it into the calculator using the link software, it installed but the same problems remains. I dont know what i did wrong on the installation. But if someone could tell me what to do as i cant boot the calculator, i would be very greatful if that means anything to you...


NVM, easily fixed it thanks to critor, like critor said to others i didnt pay attention the the steps and all i had to do was start again from the step D(ALSO HAD TO REINSTALL NDLESS. I think the step D is kinda tricky and confusing i tought the the D5 was the same of D4 and that i was reading the same step again, instead of seleting the two files i selected the first one and some random filme next or the same one. A lot of people are also getting tricked by this, i think it should be put in a more clear way. Thank you critor for providing the solution anyway, and good luck to everyone elese. Sucessfuly got my NON CAS TO CAS nspire cx, model: N-0618AD.

Also it would be great if somehow i could remove the "CAS" and "ndless installed". I bought this calculator because i wanted it to be allowed in my class, if it the teacher know it is CAS i might get in trouble. I want that feature because it makes me feel more secure and less nervous in the tests as i am able to be sure of the answers i make. I dont care if you consider that as cheating or not. The scholar system is corrupt itself. If someone could manage to help me with removing those id be greatful once again. If i discovered a way id put online for everyone as i wont care of corrupting something that is made to corrupt us.
Avatar de l’utilisateur
T3KKAN
Niveau 0: MI (Membre Inactif)
Niveau 0: MI (Membre Inactif)
Prochain niv.: 0%
 
Messages: 3
Inscription: 28 Mar 2019, 01:48
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile
Classe: A mathematics, Geo, FQ

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude T3KKAN » 28 Mar 2019, 03:05

Also what files can i delete after completing os installation to save memory?
Avatar de l’utilisateur
T3KKAN
Niveau 0: MI (Membre Inactif)
Niveau 0: MI (Membre Inactif)
Prochain niv.: 0%
 
Messages: 3
Inscription: 28 Mar 2019, 01:48
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile
Classe: A mathematics, Geo, FQ

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude critor » 28 Mar 2019, 19:13

Hi.

Everything you want, nLoader doesn't need any files once installed.

If you'd like to keep Ndless, just keep the /ndless/ndless_resources file.
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41465
Images: 14479
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install nLoader / TI-Nspire CX

Message non lude effeffe » 26 Avr 2019, 12:53

Hi, I just would like to ask whether this can work with an AB revision: I would like to install the CAS OS on a non CAS calculator, but I don't know whether it is better to wait after my exams. Don't worry: any calculator is allowed on the exams I am gonna take, also CAS calculators :)
Many Thanks
effeffe
effeffe
Avatar de l’utilisateur
effeffe
Niveau 0: MI (Membre Inactif)
Niveau 0: MI (Membre Inactif)
Prochain niv.: 80%
 
Messages: 2
Inscription: 26 Avr 2019, 12:50
Genre: Homme
Calculatrice(s):
MyCalcs profile
GitHub: effeffe

PrécédenteSuivante

Retourner vers Tutoriaux

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 17 invités

-
Rechercher
-
Social TI-Planet
-
Sujets à la une
Comparaisons des meilleurs prix pour acheter sa calculatrice !
Aidez la communauté à documenter les révisions matérielles en listant vos calculatrices graphiques !
Phi NumWorks jailbreak
123
-
Faire un don / Premium
Pour plus de concours, de lots, de tests, nous aider à payer le serveur et les domaines...
Faire un don
Découvrez les avantages d'un compte donateur !
JoinRejoignez the donors and/or premium!les donateurs et/ou premium !


Partenaires et pub
Notre partenaire Jarrety Calculatrices à acheter chez Calcuso
-
Stats.
1156 utilisateurs:
>1139 invités
>12 membres
>5 robots
Record simultané (sur 6 mois):
6892 utilisateurs (le 07/06/2017)
-
Autres sites intéressants
Texas Instruments Education
Global | France
 (English / Français)
Banque de programmes TI
ticalc.org
 (English)
La communauté TI-82
tout82.free.fr
 (Français)