π
<-
Chat plein-écran
[^]

[Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linux)

Regroupement de tous les tutoriaux Nspire.

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude GuyInFreezer » 30 Aoû 2018, 17:00

Hello!

So I followed the instruction and managed to put CAS OS in my calculator.

In About page, it says that my boot 2 code version is 255.25.5.65535. Is this normal?

And if it isn't normal, is it tied to why the cas patcher isn't working?

The OS is 4.5.
Avatar de l’utilisateur
GuyInFreezer
Niveau 0: MI (Membre Inactif)
Niveau 0: MI (Membre Inactif)
Prochain niv.: 0%
 
Messages: 3
Inscription: 30 Aoû 2018, 16:55
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude critor » 30 Aoû 2018, 22:01

Yes, the fake Boot2 version is normal. It's to prevent the Boot2 from being updated to an incompatible version.
It has nothing to do with the CAS patches.
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41470
Images: 14480
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude GuyInFreezer » 31 Aoû 2018, 13:55

Ah, I see.

Also, apparently my calculator is crashing on any math input, not just a CAS function X.X
Any suggestion on where to start to fix this?

EDIT: To clarify, ndless is working. The calculator works as intended if non-CAS OS is installed.
Avatar de l’utilisateur
GuyInFreezer
Niveau 0: MI (Membre Inactif)
Niveau 0: MI (Membre Inactif)
Prochain niv.: 0%
 
Messages: 3
Inscription: 30 Aoû 2018, 16:55
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude critor » 31 Aoû 2018, 15:40

If any math input crashes, then the problem is with the patch.

If you installed the 4.5 CAS OS on a non-CAS calculator, the patch is this one :
https://github.com/parrotgeek1/TI-Nspir ... 0.1180.tns

It has to be put in a /ndless/startup/ folder.

Then to enable it you'll need either to :
- open the patch once
- restart your calculator with the reset button on the back
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41470
Images: 14480
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude GuyInFreezer » 02 Sep 2018, 02:56

Oh, silly me. I didn't think about actually running the patcher.
Thanks!
Avatar de l’utilisateur
GuyInFreezer
Niveau 0: MI (Membre Inactif)
Niveau 0: MI (Membre Inactif)
Prochain niv.: 0%
 
Messages: 3
Inscription: 30 Aoû 2018, 16:55
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude critor » 02 Sep 2018, 09:13

Thanks for confirming it works. :)
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41470
Images: 14480
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude unilock » 01 Oct 2018, 01:29

Hello. I asked a few questions on the first page of this thread, and now I have a few more!

1. Does ControlX still overclock the calculator? I recall it doing so in earlier versions, but now it displays "CPU=198" when booting, which I believe is the default clock speed.
2. Is there any way to completely uninstall nBoot/ControlX, and restore the calculator to its factory configuration? I tried doing so a while ago by haphazardly deleting partitions and restoring images (it wasn't a very good idea, in retrospect) so I could give the calculator to someone who didn't need any sort of third-party software. While it worked (for the most part), I was left with the black & white boot screen, and I fear I might have messed something up in nsPartManagic.

Thanks again!
Avatar de l’utilisateur
unilock
Niveau 3: MH (Membre Habitué)
Niveau 3: MH (Membre Habitué)
Prochain niv.: 56%
 
Messages: 14
Inscription: 20 Aoû 2016, 20:25
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude parrotgeek1 » 01 Oct 2018, 04:38

kittensauce a écrit:Hello. I asked a few questions on the first page of this thread, and now I have a few more!

1. Does ControlX still overclock the calculator? I recall it doing so in earlier versions, but now it displays "CPU=198" when booting, which I believe is the default clock speed.
2. Is there any way to completely uninstall nBoot/ControlX, and restore the calculator to its factory configuration? I tried doing so a while ago by haphazardly deleting partitions and restoring images (it wasn't a very good idea, in retrospect) so I could give the calculator to someone who didn't need any sort of third-party software. While it worked (for the most part), I was left with the black & white boot screen, and I fear I might have messed something up in nsPartManagic.

Thanks again!

1) it does; 156 is the default on A-V
2) to fix that you need to flash the appropriate "standard v2" manuf for the calculator (in the archives here)
Avatar de l’utilisateur
parrotgeek1Programmeur
Niveau 11: LV (Légende Vivante)
Niveau 11: LV (Légende Vivante)
Prochain niv.: 88%
 
Messages: 745
Inscription: 29 Mar 2016, 01:22
Localisation: This account is no longer used.
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude unilock » 03 Oct 2018, 01:08

parrotgeek1 a écrit:1) it does; 156 is the default on A-V
2) to fix that you need to flash the appropriate "standard v2" manuf for the calculator (in the archives here)

1) Oh, thanks for correcting me. I assume that 196MHz is the safest "universal" clock speed? Would it be possible to change the overclock values to those provided by Nover's autoconfiguration? Would it even be safe to set the values above average that early in the boot process?
2) Thanks, I'll keep that in mind. I don't have access to the calculator at the moment, but I'll try to fix it if I ever have the chance. :)
Avatar de l’utilisateur
unilock
Niveau 3: MH (Membre Habitué)
Niveau 3: MH (Membre Habitué)
Prochain niv.: 56%
 
Messages: 14
Inscription: 20 Aoû 2016, 20:25
Genre: Non spécifié
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude critor » 03 Oct 2018, 10:56

196MHz is the highest safe optimal value. Higher frequencies aren't that interesting because :
- a AHB slightly higher than 66MHz is likely to silently but progressively corrupt your NAND data
- and if you lower the AHB, it will be much lower than 66MHz and thus impact the NAND performances

The next value which can be set with a 66MHz AHB is 264MHz, and I've never seen a CX calculator able to reach that.

Also, I've already seen some (rare) CX calculators being unreliable at more than 210MHz.
So hard-coding a value much higher than 196MHz in ControlX is dangerous.

But note that if you have Ndless + Nover set up, you'll calculator will still be overclocked from 196MHz to the highest safe value detected/set in Nover once the OS is launched.
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41470
Images: 14480
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

PrécédenteSuivante

Retourner vers Tutoriaux

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 13 invités

-
Rechercher
-
Social TI-Planet
-
Sujets à la une
Comparaisons des meilleurs prix pour acheter sa calculatrice !
Aidez la communauté à documenter les révisions matérielles en listant vos calculatrices graphiques !
Phi NumWorks jailbreak
123
-
Faire un don / Premium
Pour plus de concours, de lots, de tests, nous aider à payer le serveur et les domaines...
Faire un don
Découvrez les avantages d'un compte donateur !
JoinRejoignez the donors and/or premium!les donateurs et/ou premium !


Partenaires et pub
Notre partenaire Jarrety Calculatrices à acheter chez Calcuso
-
Stats.
985 utilisateurs:
>973 invités
>8 membres
>4 robots
Record simultané (sur 6 mois):
6892 utilisateurs (le 07/06/2017)
-
Autres sites intéressants
Texas Instruments Education
Global | France
 (English / Français)
Banque de programmes TI
ticalc.org
 (English)
La communauté TI-82
tout82.free.fr
 (Français)