π
<-
Chat plein-écran
[^]

[Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linux)

Regroupement de tous les tutoriaux Nspire.

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude critor » 25 Juil 2017, 13:25

Thank you for sharing your valuable experience. :)

Congrats for staying calm, analyzing the issue and fixing it. :bj:

Indeed, I think the CX/CM Boot2 3.1 is the only version which is not correctly supported by ControlX.
The included patches which make the Boot2 work in the ControlX context are compatible with all other Boot2 versions 3.0-4.4.
The problem is that, for some reason, the targeted code segments are very different in Boot2 3.1.

So indeed, a better/safer setup would be :
  • to put Boot2 4.0.3 (the only version fully supported by ControlX) in the Diags/ExtnD partition
  • in case the Diags/ExtnD partition gets erased/overwritten for some reason (it's very easy - just hold :nsho: :nsen: :nsmo: during a reset - this is a Boot1 combo, so sadly I cannot disable it), put a Boot2 image different than 3.1 in the Boot2 partition
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41465
Images: 14479
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude heimdall » 25 Juil 2017, 15:43

Thank you for your tip, I might put boot 3.2.4.
This boot1.5 thing is new to me to be honest. Was it implemented after boot2 3.9? OS 4.0.0.235 still didn't had it, if I am not mistaken. I had to finish my college admission exams by this time, so I kinda got lost by the new TI OSes and ndless updates.
Thank you for your support all over these years, even knowing I never posted anything :) Also, nice work on ControlX and nBoot. :D
Avatar de l’utilisateur
heimdall
Niveau 0: MI (Membre Inactif)
Niveau 0: MI (Membre Inactif)
Prochain niv.: 0%
 
Messages: 19
Inscription: 25 Juil 2017, 10:01
Localisation: Lisbon
Genre: Homme
Calculatrice(s):
MyCalcs profile
GitHub: deadmeatpt

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude Ti64CLi++ » 08 Aoû 2017, 16:19

dans le dossier ndless/startup, j'ai nover, nClock et nSonic. Quand je reboot la calculatrice, controlx charge bien tout mais une fois arrivé à l'écran de l'horloge sur le fond gris, la calculatrice reboot, et ce en boucle. Mais si j’empêche le chargement des programmes contenus dans ndless/startup en appuyant sur ESC tout du long, elle ne reboot plus. Je considère donc que controlx ne gère pas les programmes dans le dossier startup :(
Image
Avatar de l’utilisateur
Ti64CLi++Modo
Niveau 16: CC2 (Commandeur des Calculatrices)
Niveau 16: CC2 (Commandeur des Calculatrices)
Prochain niv.: 32.3%
 
Messages: 3441
Images: 75
Inscription: 04 Juil 2014, 14:40
Localisation: Clermont-Ferrand 63
Genre: Homme
Calculatrice(s):
MyCalcs profile
Classe: ENS Rennes
GitHub: Ti64CLi

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude critor » 08 Aoû 2017, 16:37

ControlX marche très bien avec le dossier startup.

Si ça redémarre, c'est le contenu de ton dossier startup qui est à incriminer.
Dans ton cas, je vois 2 bonnes raisons que ça plante :
- Nover (si la configuration est instable)
- nClock, qui n'est pas compatible avec les OS 4.0.3+
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41465
Images: 14479
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude Ti64CLi++ » 08 Aoû 2017, 18:14

bah en fait nover a trouvé la bonne configuration, car si je lance le fichier ndless_installer après avoir appuyé sur esc au cours du démarrage, il revient à l'écran d'accueil.
Donc c'est surement nClock :(
Image
Avatar de l’utilisateur
Ti64CLi++Modo
Niveau 16: CC2 (Commandeur des Calculatrices)
Niveau 16: CC2 (Commandeur des Calculatrices)
Prochain niv.: 32.3%
 
Messages: 3441
Images: 75
Inscription: 04 Juil 2014, 14:40
Localisation: Clermont-Ferrand 63
Genre: Homme
Calculatrice(s):
MyCalcs profile
Classe: ENS Rennes
GitHub: Ti64CLi

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude critor » 31 Aoû 2017, 00:41

Attached is ControlX 4.5.0.
controlx4.5.0.zip
(268.89 Kio) Téléchargé 94 fois


Added boot patches for OS 4.5.0.1180 (both CX and CX CAS).
Also added Ndless installer patches for OS 4.5.0.1180 (both CX and CX CAS).

The CX CAS payload being now too big, commented support for the least interesting OSes in the Makefile :
- leaked CX CAS OS 4.4.0.531 (just use released 4.4.0.532, which is the only one targetted by Ndless 4.4)
- leaked CX CAS OS 4.3.0.547 (just use released 4.3.0.702)

Note that your /ndless/ndless_resources file will have to include the 4.5 syscalls for the Ndless installer to work properly.
Using this on OS 4.5.0.1180 with the unupdated Ndless 4.4 ndless_resources file is just going to get you a reboot loop.


Now waiting for Ndless 4.5...
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41465
Images: 14479
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude geekpersonman » 31 Aoû 2017, 21:51

So Ndless Installer patches do not fix reboot loops for using an 4.4 ndless resources files with controlX? Basically is it safe to update controlX and the OS itself and still have Ndless work in any capacity?
Avatar de l’utilisateur
geekpersonman
Niveau 6: SM (Super Membre)
Niveau 6: SM (Super Membre)
Prochain niv.: 7.1%
 
Messages: 47
Inscription: 21 Aoû 2015, 01:45
Genre: Homme
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude critor » 31 Aoû 2017, 21:57

You can update ControlX to 4.5.0.

If you choose to update to OS 4.5 too :
- be sure to update the /ndless/ndless-resources file with the Ndless 4.5 one first (when available of course)
- or remove/rename it
Image
Avatar de l’utilisateur
critorAdmin
Niveau 19: CU (Créateur Universel)
Niveau 19: CU (Créateur Universel)
Prochain niv.: 41.8%
 
Messages: 41465
Images: 14479
Inscription: 25 Oct 2008, 00:00
Localisation: Montpellier
Genre: Homme
Calculatrice(s):
MyCalcs profile
YouTube: critor3000
Twitter/X: critor2000
GitHub: critor

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude geekpersonman » 01 Sep 2017, 00:29

When would be a reasonable time to expect an update for ndless?
Avatar de l’utilisateur
geekpersonman
Niveau 6: SM (Super Membre)
Niveau 6: SM (Super Membre)
Prochain niv.: 7.1%
 
Messages: 47
Inscription: 21 Aoû 2015, 01:45
Genre: Homme
Calculatrice(s):
MyCalcs profile

Re: [Tuto] [EN/FR] Install/Installer nBoot + ControlX (+Linu

Message non lude Lionel Debroux » 01 Sep 2017, 07:47

It all depends on factors such as the availability of vulnerabilities and the free time of the unpaid volunteers who do the work. For the past seven years and a half, Ndless releases have not been publicly pre-announced, for good reasons :)
Membre de la TI-Chess Team.
Co-mainteneur de GCC4TI (documentation en ligne de GCC4TI), TIEmu et TILP.
Avatar de l’utilisateur
Lionel DebrouxSuper Modo
Niveau 14: CI (Calculateur de l'Infini)
Niveau 14: CI (Calculateur de l'Infini)
Prochain niv.: 11.2%
 
Messages: 6859
Inscription: 23 Déc 2009, 00:00
Localisation: France
Genre: Homme
Calculatrice(s):
MyCalcs profile
Classe: -
GitHub: debrouxl

PrécédenteSuivante

Retourner vers Tutoriaux

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 19 invités

-
Rechercher
-
Social TI-Planet
-
Sujets à la une
Comparaisons des meilleurs prix pour acheter sa calculatrice !
Aidez la communauté à documenter les révisions matérielles en listant vos calculatrices graphiques !
Phi NumWorks jailbreak
123
-
Faire un don / Premium
Pour plus de concours, de lots, de tests, nous aider à payer le serveur et les domaines...
Faire un don
Découvrez les avantages d'un compte donateur !
JoinRejoignez the donors and/or premium!les donateurs et/ou premium !


Partenaires et pub
Notre partenaire Jarrety Calculatrices à acheter chez Calcuso
-
Stats.
1593 utilisateurs:
>1581 invités
>8 membres
>4 robots
Record simultané (sur 6 mois):
6892 utilisateurs (le 07/06/2017)
-
Autres sites intéressants
Texas Instruments Education
Global | France
 (English / Français)
Banque de programmes TI
ticalc.org
 (English)
La communauté TI-82
tout82.free.fr
 (Français)