Hello,
every time I try to install The Ndless SDK if I try to build the the picture marked position get this error on linux and Windows:
$ make
make -C ndless-sdk
make[1]: Entering Entering directory „/ndless/new/ndless/ndless-sdk“
make -C libsyscalls
make[2]: Entering directory „/ndless/new/ndless/ndless-sdk/libsyscalls“
php mkStubs.php > ../include/syscall-decls.h
arm-none-eabi-g++ -mcpu=arm926ej-s -std=c++11 -nostdlib -O3 -fPIE -fno-exceptions -fno-rtti -mlong-calls -Wall -Werror -I ../include/ -I ../thirdparty/nspire-io/include/ -D_TINSPIRE -ffunction-sections -fdata-sections -c stubs.cpp -o stubs.o
make[2]: arm-none-eabi-g++: Command not found
make[2]: *** [Makefile:17: stubs.o] Fehler 127
make[2]: Entering directory „/ndless/new/ndless/ndless-sdk/libsyscalls“
make[1]: *** [Makefile:13: build-libsyscalls] Error 2
make[1]: Entering directory „/ndless/new/ndless/ndless-sdk“
make: *** [Makefile:19: build-ndless-sdk] Error 2
Can anybody say, whats the issue?
Or it is possible to download the compiled SDK?
Error while Installing Nspire SDK
Voir le premier message non lu • 9 messages
• Page 1 sur 1
-
FBEI
Niveau 2: MI2 (Membre Initié)- Messages: 3
- Inscription: 03 Mar 2017, 22:53
- Genre:
- Calculatrice(s):→ MyCalcs profile
Re: Error while Installing Nspire SDK
Make sure to have the PATH changes applied before building Ndless and the SDK.
For instance, close the terminal and open it again. If you did the path update correctly, then it should work (in this case, arm-none-eabi-g++ will be found)
For instance, close the terminal and open it again. If you did the path update correctly, then it should work (in this case, arm-none-eabi-g++ will be found)
MyCalcs: Help the community's calculator documentations by filling out your calculators info!
MyCalcs: Aidez la communauté à documenter les calculatrices en donnant des infos sur vos calculatrices !
Inspired-Lua.org: All about TI-Nspire Lua programming (tutorials, wiki/docs...)-
AdriwebAdmin
Niveau 16: CC2 (Commandeur des Calculatrices)- Messages: 14613
- Images: 1218
- Inscription: 01 Juin 2007, 00:00
- Localisation: France
- Genre:
- Calculatrice(s):→ MyCalcs profile
- Twitter/X: adriweb
- GitHub: adriweb
Re: Error while Installing Nspire SDK
I used this commands to add the PATH:
export PATH="/home/user/Schreibtisch/Ndless/ndless-sdk/toolchain/install/bin:/home/user/Schreibtisch/Ndless/ndless-sdk/bin:${PATH}:/home/user/bin:/home/user/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games" >> ~/.bash_profile
But if I enter echo $PATH
the Path is not changed
export PATH="/home/user/Schreibtisch/Ndless/ndless-sdk/toolchain/install/bin:/home/user/Schreibtisch/Ndless/ndless-sdk/bin:${PATH}:/home/user/bin:/home/user/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games" >> ~/.bash_profile
But if I enter echo $PATH
the Path is not changed
-
FBEI
Niveau 2: MI2 (Membre Initié)- Messages: 3
- Inscription: 03 Mar 2017, 22:53
- Genre:
- Calculatrice(s):→ MyCalcs profile
Re: Error while Installing Nspire SDK
You may need to save that into .bashrc not bash_profile, it depends. Also, see http://unix.stackexchange.com/a/26059 in general for the proper way to add a path.
Simply put, just add the export line at the end of your shell config file. You can use gedit,nano,vim,emacs, whatever, to do that.
But as I said, after that, you'll need to relaunch a terminal to take it into account (or 'source' the config file again).
Simply put, just add the export line at the end of your shell config file. You can use gedit,nano,vim,emacs, whatever, to do that.
But as I said, after that, you'll need to relaunch a terminal to take it into account (or 'source' the config file again).
MyCalcs: Help the community's calculator documentations by filling out your calculators info!
MyCalcs: Aidez la communauté à documenter les calculatrices en donnant des infos sur vos calculatrices !
Inspired-Lua.org: All about TI-Nspire Lua programming (tutorials, wiki/docs...)-
AdriwebAdmin
Niveau 16: CC2 (Commandeur des Calculatrices)- Messages: 14613
- Images: 1218
- Inscription: 01 Juin 2007, 00:00
- Localisation: France
- Genre:
- Calculatrice(s):→ MyCalcs profile
- Twitter/X: adriweb
- GitHub: adriweb
Re: Error while Installing Nspire SDK
Know i added the PATH successfully, but i also get the Error: make[2]: arm-none-eabi-g++: Command not found
I also Rebooted also the system
I also Rebooted also the system
-
FBEI
Niveau 2: MI2 (Membre Initié)- Messages: 3
- Inscription: 03 Mar 2017, 22:53
- Genre:
- Calculatrice(s):→ MyCalcs profile
Re: Error while Installing Nspire SDK
FBEI a écrit:I used this commands to add the PATH:
export PATH="/home/user/Schreibtisch/Ndless/ndless-sdk/toolchain/install/bin:/home/user/Schreibtisch/Ndless/ndless-sdk/bin:${PATH}:/home/user/bin:/home/user/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games" >> ~/.bash_profile
But if I enter echo $PATH
the Path is not changed
The command you posted won't do anything. It saves the *output* of export into bash_profile.
You want to save the command itself to bash_profile. So just open it in your favorite editor and add it.
-
VogtinatorPremium
Niveau 9: IC (Compteur Infatigable)- Messages: 217
- Inscription: 29 Mar 2014, 15:55
- Genre:
- Calculatrice(s):→ MyCalcs profile
Re: Error while Installing Nspire SDK
actually if you just added echo to the beginning of that command it should work
-
parrotgeek1Programmeur
Niveau 11: LV (Légende Vivante)- Messages: 745
- Inscription: 29 Mar 2016, 01:22
- Localisation: This account is no longer used.
- Genre:
- Calculatrice(s):→ MyCalcs profile
Re: Error while Installing Nspire SDK
parrotgeek1 a écrit:actually if you just added echo to the beginning of that command it should work
No, because it would strip the "s.
-
VogtinatorPremium
Niveau 9: IC (Compteur Infatigable)- Messages: 217
- Inscription: 29 Mar 2014, 15:55
- Genre:
- Calculatrice(s):→ MyCalcs profile
Re: Error while Installing Nspire SDK
Vogtinator a écrit:parrotgeek1 a écrit:actually if you just added echo to the beginning of that command it should work
No, because it would strip the "s.
oh, good point
-
parrotgeek1Programmeur
Niveau 11: LV (Légende Vivante)- Messages: 745
- Inscription: 29 Mar 2016, 01:22
- Localisation: This account is no longer used.
- Genre:
- Calculatrice(s):→ MyCalcs profile
9 messages
• Page 1 sur 1
Retourner vers Native: Ndless, Linux, ...
Qui est en ligne
Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 6 invités