i bricked my Nspire CX-AB while install ControlX and nBoot.
reset without pressing any key -> red X
reset with + + -> red X
reset with + + -> red X
reset with + + -> black screen
boot2 update mode( + + ) is black screen.. can i use USB/TTL converter to fix this problem?
can anyone give me a hand and save me from this issue?
i am non-English speaker sorry for poor english.
(CX) bricked both boot2 and diag boot..
Voir le premier message non lu • 6 messages
• Page 1 sur 1
-
bolcano
Niveau 1: MD (Membre Débutant)- Messages: 3
- Inscription: 27 Avr 2021, 15:07
- Genre:
- Calculatrice(s):→ MyCalcs profile
Re: (CX) bricked both boot2 and diag boot..
Hi.
A red X has nothing to do with ControlX, and anyway nBoot+ControlX can't work with hardware revision W or above.
It's nLoader which is showing a red X.
If there is no way to make the calculator reach the Boot2 or OS menus, then yes the USB/TTL adapter is the only way to repair it.
A red X has nothing to do with ControlX, and anyway nBoot+ControlX can't work with hardware revision W or above.
It's nLoader which is showing a red X.
If there is no way to make the calculator reach the Boot2 or OS menus, then yes the USB/TTL adapter is the only way to repair it.
-
critorAdmin
Niveau 19: CU (Créateur Universel)- Messages: 41497
- Images: 14640
- Inscription: 25 Oct 2008, 00:00
- Localisation: Montpellier
- Genre:
- Calculatrice(s):→ MyCalcs profile
- YouTube: critor3000
- Twitter/X: critor2000
- GitHub: critor
Re: (CX) bricked both boot2 and diag boot..
thanks for reply.
i didn't know that nBoot+ControlX can't work on my CX.. that's my fault.
+ + command shows me only black screen, do you think can i reflash boot2 at this situation by using USB/TTL adapter?
i didn't know that nBoot+ControlX can't work on my CX.. that's my fault.
+ + command shows me only black screen, do you think can i reflash boot2 at this situation by using USB/TTL adapter?
-
bolcano
Niveau 1: MD (Membre Débutant)- Messages: 3
- Inscription: 27 Avr 2021, 15:07
- Genre:
- Calculatrice(s):→ MyCalcs profile
Re: (CX) bricked both boot2 and diag boot..
Yes, the screen remains black on hardware W+, but it still works.
-
critorAdmin
Niveau 19: CU (Créateur Universel)- Messages: 41497
- Images: 14640
- Inscription: 25 Oct 2008, 00:00
- Localisation: Montpellier
- Genre:
- Calculatrice(s):→ MyCalcs profile
- YouTube: critor3000
- Twitter/X: critor2000
- GitHub: critor
Re: (CX) bricked both boot2 and diag boot..
it worked!! thank you very much
-
bolcano
Niveau 1: MD (Membre Débutant)- Messages: 3
- Inscription: 27 Avr 2021, 15:07
- Genre:
- Calculatrice(s):→ MyCalcs profile
-
critorAdmin
Niveau 19: CU (Créateur Universel)- Messages: 41497
- Images: 14640
- Inscription: 25 Oct 2008, 00:00
- Localisation: Montpellier
- Genre:
- Calculatrice(s):→ MyCalcs profile
- YouTube: critor3000
- Twitter/X: critor2000
- GitHub: critor
6 messages
• Page 1 sur 1
Retourner vers Problèmes divers / Aide débutants
Qui est en ligne
Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 41 invités