Hello there!
My calculator was stuck in the middle of the loading and also could not start the DIAGS menu, so I bought an TTL-USB to try to solve the problem however, I saw that bad block that you can see on the image https://imgur.com/bMf86i4.
I have tried to reboot it in the DOC + ENTER + EE mode but np matter what function I use it end up at the beginning no matter how much time passes.
Hope you can help me!
Thanks in advance
Factory Bad Block
Voir le premier message non lu • 8 messages
• Page 1 sur 1
-
carvalhoo_28
Niveau 2: MI2 (Membre Initié)- Messages: 7
- Inscription: 29 Juin 2020, 14:41
- Genre:
- Calculatrice(s):→ MyCalcs profile
Re: Factory Bad Block
I had the same problem on a Nspire CX CAS, and I had to flash a new Boot2 with the TTL-USB
-
Ti64CLi++Modo
Niveau 16: CC2 (Commandeur des Calculatrices)- Messages: 3441
- Images: 75
- Inscription: 04 Juil 2014, 14:40
- Localisation: Clermont-Ferrand 63
- Genre:
- Calculatrice(s):→ MyCalcs profile
- Classe: ENS Rennes
- GitHub: Ti64CLi
Re: Factory Bad Block
How did you do to flash? Because mine after appearing the error doesn't let me send the file
-
carvalhoo_28
Niveau 2: MI2 (Membre Initié)- Messages: 7
- Inscription: 29 Juin 2020, 14:41
- Genre:
- Calculatrice(s):→ MyCalcs profile
Re: Factory Bad Block
I used this tuto : https://tiplanet.org/modules/archives/d ... air301.pdf .
Even though it's not intended for Nspire CX (CAS), it will work if you choose a correct Boot2 for your calc (4.0 for Nspire CX for example )
Even though it's not intended for Nspire CX (CAS), it will work if you choose a correct Boot2 for your calc (4.0 for Nspire CX for example )
-
Ti64CLi++Modo
Niveau 16: CC2 (Commandeur des Calculatrices)- Messages: 3441
- Images: 75
- Inscription: 04 Juil 2014, 14:40
- Localisation: Clermont-Ferrand 63
- Genre:
- Calculatrice(s):→ MyCalcs profile
- Classe: ENS Rennes
- GitHub: Ti64CLi
Re: Factory Bad Block
I tried that, but the bad Block error doesn't let me flash the boot 2😔
-
carvalhoo_28
Niveau 2: MI2 (Membre Initié)- Messages: 7
- Inscription: 29 Juin 2020, 14:41
- Genre:
- Calculatrice(s):→ MyCalcs profile
-
Ti64CLi++Modo
Niveau 16: CC2 (Commandeur des Calculatrices)- Messages: 3441
- Images: 75
- Inscription: 04 Juil 2014, 14:40
- Localisation: Clermont-Ferrand 63
- Genre:
- Calculatrice(s):→ MyCalcs profile
- Classe: ENS Rennes
- GitHub: Ti64CLi
Re: Factory Bad Block
I have a Ti Nspire Cx and I am trying to send the 4.4 version
-
carvalhoo_28
Niveau 2: MI2 (Membre Initié)- Messages: 7
- Inscription: 29 Juin 2020, 14:41
- Genre:
- Calculatrice(s):→ MyCalcs profile
-
Ti64CLi++Modo
Niveau 16: CC2 (Commandeur des Calculatrices)- Messages: 3441
- Images: 75
- Inscription: 04 Juil 2014, 14:40
- Localisation: Clermont-Ferrand 63
- Genre:
- Calculatrice(s):→ MyCalcs profile
- Classe: ENS Rennes
- GitHub: Ti64CLi
8 messages
• Page 1 sur 1
Retourner vers Problèmes divers / Aide débutants
Qui est en ligne
Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 76 invités