CAS on Ordinary Ti-Nspire (not CX)/ CAS sur Ti-Nspire ordina

[DaddyLongLegs]

I know it's possible to install CAS on a normal Ti-Nspire CX but can this be done with a regular Nspire? At first, I thought it would be possible through the CX method but the original Ti-Nspire firmware doesn't go above 3.9 so I cannot use that method as the required version is 4.4.0 for it. I haven't found any answers elsewhere and I really want to know if it's possible. I want to be able to just get a regular Nspire so I can use the ti-84 keyboard add on and spend less money. If someone knows how and is willing to tell me I would greatly appreciate it.

Je sais qu'il est possible d'installer CAS sur un Ti-Nspire CX normal, mais cela peut-il être fait avec un Nspire ordinaire? Au début, je pensais que ce serait possible grâce à la méthode CX, mais le firmware d'origine Ti-Nspire ne dépasse pas 3.9, donc je ne peux pas utiliser cette méthode car la version requise est 4.4.0 pour cela. Je n'ai trouvé aucune réponse ailleurs et je veux vraiment savoir si c'est possible. Je veux pouvoir simplement obtenir un Nspire régulier pour pouvoir utiliser le clavier ti-84 et dépenser moins d'argent. Si quelqu'un sait comment et veut me dire, je l'apprécierais grandement.

[Bisam]

It's definitely possible. Although you probably haven't searched much in this site because there are quite a lot of topics dealing with that !
You will need these two tutorials :
First for installing Ndless 3.9 : viewtopicfirstpost.php?f=57&t=16073
Then, installing ControlX, and then installing another OS on your calc : viewtopic.php?f=57&t=18920

You may ask questions if needed, of course. Just be sure to PERFECTLY read and perform the instructions.

[GalacticPirate]

Bisam: the second topic you linked, which is the nBoot+ControlX installation tutorial, explicitly states that you need a CX or CM model, but DaddyLongLegs seems to have a ClickPad or TouchPad monochrome Nspire. I think maybe it'd require an older tool?

[Bisam]

You're right : I forgot that ControlX only works on CX or so.
Then it should be with Nlaunchy : viewtopic.php?f=43&t=19684 (thanks to Adriweb who reminded me this topic)