Red screen. Need some help!

→ **MyCalcs** profile · de **vhrks** » 20 Déc 2019, 05:28

I tried doc ee enter, but there is some battery problem i think.

So I tried esc menu minus, but it didnt work. I think diagnose software died also.

→ **MyCalcs** profile · de **Extra44** » 20 Déc 2019, 14:00

Maybe :
First, try to charge the device (for me, it take a complete night)

And then see if it answer the same thing !

→ **MyCalcs** profile · de **critor** » 20 Déc 2019, 15:04

You can't invoke maintenance menu with a low battery.

→ **MyCalcs** profile · de **Hamza.S** » 20 Déc 2019, 15:20

Il peut tenter le diagnostic pour recharger la batterie en attendant non ?

→ **MyCalcs** profile · de **Extra44** » 20 Déc 2019, 15:40

Hamza.S a écrit:Il peut tenter le diagnostic pour recharger la batterie en attendant non ?

I think The problem is :his battery is low.
He can do charging his battery, and after a while try to use diagnostic menu.

→ **MyCalcs** profile · de **critor** » 20 Déc 2019, 16:12

vhrks a écrit:I tried doc ee enter, but there is some battery problem i think.

So I tried esc menu minus, but it didnt work. I think diagnose software died also.

should bring up the ControlX menu.
From the ControlX menu, it's possible to launch the Diags software.

Holding

should also trigger the ControlX menu.

→ **MyCalcs** profile · de **vhrks** » 20 Déc 2019, 17:27

critor a écrit:
vhrks a écrit:I tried doc ee enter, but there is some battery problem i think.

So I tried esc menu minus, but it didnt work. I think diagnose software died also.

should bring up the ControlX menu.
From the ControlX menu, it's possible to launch the Diags software.

Holding should also trigger the ControlX menu.

https://www.reddit.com/r/nspire/comment ... urce=share

can you check the video?

→ **MyCalcs** profile · de **critor** » 20 Déc 2019, 17:34

Yes, thanks.

Apparently ControlX doesn't work anymore.

Do you remember your OS version ?

→ **MyCalcs** profile · de **vhrks** » 20 Déc 2019, 18:28

critor a écrit:Yes, thanks.

Apparently ControlX doesn't work anymore.

Do you remember your OS version ?

Few months ago (when the calculator works fine) shen I voot my ti, some.pop up says "constrol X 4.5.0" this means 4.5.0 right? And back of the calc, xxxxxx P-0911D. Some says if you want to install ndless, the letters are important. Right?

→ **MyCalcs** profile · de **critor** » 20 Déc 2019, 18:34

Hardware Revision D is ok.

But do you remember the calculator Operating System version ? 4.5.0 ? 4.5.1 ? 4.5.2 ?...
Did you install the latest 4.5.2 version ?

Could you explain what you did before the red screen appeared for the first time ?

Thanks.