Boot2 4.4.0.8

[cxz7410]

Hi,
Does anybody know where can I find "Boot2 4.4.0.8"?
Thanks in advance.

[geekpersonman]

Here is a copy, just delete the .tns part of the extension:


(Note: It's simply in the OS file, you can download it and extract it yourself as well)

[cxz7410]

Thank you for your reply.

I'm trying to run the Firebird Emu with OS TI-Nspire CX CAS 4.5.0.1180 (archives_voir.php?id=1129588)
It says that it needs Boot2 4.4.0.8
My problem now is that Firebird Emu is also asking for Boot1 which I don't know where to find it.
Any help would be appreciated.

[Adriweb]

As explained in the firebird wiki, you need to dump it from your own Nspire, with tools you can download here. It cannot be shared, unlike the boot2 and OS.

[Lionel Debroux]

Normally, you need to dump your own calculator's boot1. TI does not distribute the boot1 publicly, and users probably shouldn't post it publicly either.
Polydumper is the main, easy way to dump the boot1

[cxz7410]

Thank you for the answers.
My nSpire is not the CX CAS version.
Can I use the Boot1 of my nSpire to run Firebird with the OS TI-Nspire CX CAS 4.5.0.1180?

[Lionel Debroux]

Technically, yes, you can

[cxz7410]

I got the Boot1 from my nspire and I created the flash image in firebird.
Unfortunately it crashes.
Any help would be great.

[critor]

You need a TI-Nspire CX or CX CAS Boot1 (Boot1 version is 3.0 or 4.0).

[geekpersonman]

It also looks like you haven't selected an Manuf or Diags image either, Manuf is necessary for the calculator to boot. If you cannot dump it yourself you can use nBoot instead: /forum/archives_voir.php?id=652780