Forum TI-Planet.org

Hi, i was changing colors in the default theme of my calculator but then i pressed the reset button but after the loading the display remain grey with the picture of the clock...what can i do to solve the problem?
thanks

You need to launch the diagnostic software which should report you the problem and automatically fix it.

• Press and hold the 'reset' button on the back
• Press and hold
• Release the 'reset' button - the calculator should turn on
• Release the other keys

The diagnostics software should report the problem with a GPIO error.
Just press esc and then use 'reset' to reboot the calculator.

It should be ok now

If you want, you can also do this: press reset, , : ,and .Then stop pressing Reset, and the usual screen appears. At the middle of the loading, a menu will appear: choose 5 and confirm. After, download your OS and install it through the Studend software. If the problem still exists, I don't know...

No quentin974: the maintenance menu does not solve this problem as it does not clear the SRAM.
The installed OS will be stuck at the same place.

The right answer is the diagnostics software as described in my above post.
For your personal information, the problem is described in this french topic:
viewtopic.php?f=16&t=8944

hi guys i solved my problem!!
thanks to everybody!!!